Building Construction 2*11Kw Buck Hoist Elevator
There are two accesses for floor selecting and leveling:
1.Manual control, which is dirct control by the operator.
2. computer automatic positing system,which can easliy realize
floor-selecting and leveling without manual stop or point car
leveling,reduce the difficulty of manipulation,convenient and
precise.SS100/100 adopts wall-attaching device instead of wind rope
along with self-erection and dismantling init ,easy to handling and
transportation.
Design
It is the truly modular rack and pinion hoist design, so the
elevator drive devices and cars are generic and interchangeable.
Production and Materials
KANGBO implements the true modular design of rack and pinion
hoists, standardization and fine finishing of lifts parts and spare
parts, and assembly line production. The material elevator
components are versatile and universal.
The construction material elevator structural parts are made of
16Mn and Q345 high strength steel.
Standard Configuration
There is a small crane for conenient assembly of the construction
lift.
Available in single or twin hoist cage configuration.
Frequency control Motors, makes the construction hoists starting
and stopping very smoothly, with low starting current and much less
wear and tear.
Manual or Automatic Controls of the hoist is optional.
Buck Hoist Elevator Parameters
| Technical Data | KP-B05, KP-B06 |
| Payload capacity | 2,000 kg |
| Lifting speed | 0–36 m/min. |
| Max. lifting height | 250/400 m* |
| Cage width (internal) | 1.5 m |
| Cage length (internal) | 3.2 m |
| Cage height (internal) | 2.35 m |
| Motor control | FC control |
| Engine power | 2x11 kw |
| Gearbox | Helical reducer |
| Safety device type | centrifugal brake |
| Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
| Type of mast | square column 650*650 mm with bolted rack |
| Length mast section | 1.508 m |
| Rack module | 8 |
| * Increased lifting height on request. 250 m with step-up
transformer only. 400 m with step-up/step-down transformer. |
