Men / Cargo Transportation 46 M/Min Rack And Pinion Hoist
Rack And Pinion Hoist Introduction
Due to the frequency conversion elevator using computeraided
design,configuration of frequency conversion device, so compared
with the traditional construction lifter, smooth starting and
stopping, effectively reduce the wastage of the parts, prolong
service life, it has a high transmission efficiency, beautiful
shape, light structure, tear open outfit is convenient,safe and
reliable, strong applicability, wide range of USES, etc.
Rack And Pinion Hoist Features
Motors are FC controlled make the lifts start/stop smoothly.
Adopt Schneider inverters.
Flap Type Exit Door as loading/unloading ramp are availble.
Strengthened lifts car frame, extremely strong cage make the lifts
durable.
Lifts car roof made of steel plate and the edges are totally
welded.
Rack And Pinion Hoist Production
Main steel channel of the cage frame are enlarged and thickened.
Cage roof edges are totally welded by robots.
Main steel structure parts are made of cold rolled steel plates and
processed by CNC machines in tool fixtures.
Rack And Pinion Hoist Parameters
| Technical Data | KP-B07, B08 Rack And Pinion Hoist |
| Payload capacity | 2,000 kg |
| Lifting speed | 0–46 m/min. |
| Max. lifting height | 250/400 m* |
| Cage width (internal) | 1.5 m |
| Cage length (internal) | 3.2 m |
| Cage height (internal) | 2.35 m |
| Motor control | FC control |
| Engine power | 2x15 kw |
| Gearbox | Helical reducer |
| Safety device type | centrifugal brake |
| Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
| Mast Section | Square Column 650*650*1508 mm with bolted rack |
| Rack module | 8 |
| * Increased lifting height on request. 250 m with step-up
transformer only. 400 m with step-up/step-down transformer. |
