Building Safety 2 Tons Construction Material Lifting Hoist
Construction Material Lifting Hoist Main Parts
1. The gearing adopts imported bearing, enameled cable, and oil
seal.
2. The electric parts adopt products from world renowned
manufactures such as Schneider, Siemens, and LG.
3. The racks and pinion adopts special material and heat-treatment
technique, which prolong the life of these parts.
4. The steel structure uses quality steel from famous domestic
manufactures.
5. The surface of the structure can apply paint-spray, parkerozing
baking finish or hot galvanizing processing according to users
requirements,
6. The cage can be produced and decorated by aluminum molded board,
punched-plate or figured aluminm board.
Construction Material Lifting Hoist Advantage:
* Modular design for easy installation and maintenance.
* Standardized parts and components.
* Variable Frequency Control (VFC), with closed-loop.
* Composite Power & Control Cable, or Busbar.
* Smooth starting/stopping and running without jerk or vibration.
Production
All parts and components are processed by CNC machines and robots
in tool fixtures.
Parts and components are universal and exchangeable.
Construction Material Lifting Hoist Parameters
| Technical Data | KP-B05, KP-B06 |
| Max. lifting height | 400 m |
| Payload capacity | 2,000 kg |
| Lifting speed | 0–36 m/min. |
| Cage size (internal) | 3.2(L)x1.5(W)*2.35(H) meter |
| Motor control | FC control |
| Engine power | 2x11 kw |
| Gearbox | Helical reducer |
| Safety device type | centrifugal brake |
| Type of mast | square column 650*650 mm with bolted rack |
| Length mast section | 1.508 m |
| Rack module | 8 |
