Frequency Control Motors 450m Building Lifts Elevators
Building Lifts Elevators Introduction
The Building Lifts Elevators are widely used at the sites of
industrial and civil construction, bridge construction, underground
construction, large chimney construction, ship industry and so on.
Being suitable for the vertical transport of materials and people,
they can also be used as permanent / semi-permanent electric
elevators and in various sites like warehouses and high towers.
Building Lifts Elevators Design
It is the truly modular rack and pinion hoist design, so the
elevator drive devices and cars are generic and interchangeable.
Building Lifts Elevators Features and Advantages
The modular and standardizing system makes the Kangbo construction
elevators be flexible, efficient, safe, productive, low energy
consumptive and ownership cost, making them the best choice for
both construction and rental companies.
Adopt energy-saving helical reducers made specially for rack and
pinion elevators, extremely strong, reliable and durable.
Racks centering at mast reduce partial load torque of builders
hoists, makes the construction hoists run more stably and smoothly.
Applying non-eccentric rollers, make the installation of
construction site elevators be faster and easier, with much less
error.
| Technical Data | KP-B07, B08 |
| Payload Capacity | 2,000 kg |
| Lifting Speed | 0–46 m/min. |
| Max. Lifting Height | 250/400 m* |
| Cage Width (internal) | 1.5 m |
| Cage Length (internal) | 3.2 m |
| Cage Height (internal) | 2.35 m |
| Motor Control | FC control |
| Engine Power | 2x15 kw |
| Gearbox | Helical Reducer |
| Safety Device | Centrifugal Brake |
| Power Supply Range | 380–500 V, 50 or 60 Hz, 3 phase |
| Mast Section | Square column 650*650*1508 mm with bolted rack |
| Rack Module | 8 |
| * Increased lifting height on request. 250 m with step-up
transformer only. 400 m with step-up/step-down transformer. |
