Long Life Bridges Construction 450m Passenger And Material Hoist
Passenger And Material Hoist Description
1. Passenger And Material Hoist have features as good quality, long
life, wide applicationrange and convenient for maintenance.
2. Passenger And Material Hoist's gearing adopts imported bearing,
enameled cable and oil seal.
3. Passenger And Material Hoist's electric parts adopt products
from world renowned manufacturers such as Schneider, Siements and
LG.
4. Passenger And Material Hoist's racks and pinion adopts special
material and heat-treatment technique, which prolong the life of
these parts.
5. Passenger And Material Hoist's steel structure uses quality
steel from famous domestic manufacturers, The surface of the steel
structures can apply paint-spray, parkerizing baking finish or hot
galvanizing processing according to users requirements. The cage
can be produced and decorated by aluminium molded board,
punched-plate or figured aluminium board.
Passenger And Material Hoist Configuration
There is a electrical small crane available to facilitate the
assembly of the construction elevator.
There is the additional 'C' door at cage side for convenient
loading/unloading.
Available in single or twin hoist cage configuration.
The construction rack and pinion elevators are Variable Frequency
Drive (VFD), with low starting current and much less wear and tear,
very smooth starting and stopping.
Manual or Automatic Controls of the hoist is optional.
Passenger And Material Hoist Technical Data
| Item & Article No. | SC200BG, MP-B11; SC200/200BZ, MP-B12 |
| Payload Capacity | 2,000 KG per Cage |
| Lifting Speed | 0–60 m/min. |
| Max. Lifting Height | 450 m |
| Cage Size (internal) | 3.2(Length)*1.5(Width)*2.35(Height) Meter per Cage |
| Cage Doors | 3 Doors, Entry Door + Exit Door + Side Door |
| Motor Control | FC (Frequency Control) |
| Engine Power | 3x15 KW per Cage |
| Gearbox | Helical Gearbox |
| Safety Device Type | Centrifugal Brake |
| Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
| Type of Mast | Square Column 650*650 mm with Bolted Rack |
| Length Mast Section | 1.508 m |
| Rack Module | 8 |
