10 To 50 Ton Per Hour Horizontal Shaft High Efficiency Fine Sand
Making Crusher Machine
The impact fine crusher is a new high-efficiency sand making
equipment, which were developed according to the feedback of our
users referring to the working principles and advantages of various
crushers. A typical use is to adapt to the current mechanism of
sand industry and is substitute of rod-mill sand maker, impact sand
maker, and straight processing sand maker. It is featured by the
stable and reliable performance, simplified process, simple
structure, easy maintenance, big producing capacity, and long
service life of hammer, which is widely used for the fine crushing
in granite, basalt, limestone, cobble, cement clinker, quartz
stone, iron ore, and bauxite etc, and also used for producing the
high quality building stones in the mechanism artificial sand
making, high class of highway, railway, water conservancy, airport,
building, cement, refractories, and metallurgical industries.
Working principle
When the Impact Crusher works, the motor drives the rotor to rotate
with high speed, on the rotor where installed the hammers. When the
materials are fed into the crushing cavity, under the impact
function of the hammer at a high speed, the materials are crashed
against the rotor continuously. And then the materials are
rebounded from the impact liner to the area where the hammers
effects for being re-crushed. The materials from large to small all
to be crushed at the impact chamber repeatedly. The process won't
stop till the material are crushed to the required size and then
discharged from outlet of the Impact Crusher.
Specifications
| odel | Feeding size (mm) | Discharge size (mm) | Adjust the width of the discharge slit | Cement clinker (t/h) |
limestone(t/h) | Motor power (kw) | Weight(t) |
| 800x400 | 120 | 5 | 5 - 20 | 20-30 | 35-45 | 37-45 | 3.9 |
| 800x600 | 180 | 5 | 5 - 20 | 35-40 | 45-55 | 45-55 | 4.5 |
| 800x800 | 180 | 5 | 5 - 20 | 35-45 | 55-65 | 45-55 | 6 |
| 1010x1010 | 180 | 5 | 5 - 20 | 45-55 | 65-75 | 55-75 | 10.5 |
| 1200x1200 | 180 | 5 | 5 - 20 | 100-110 | 90-100 | 100-132 | 14.4 |
| 1400x1400 | 190 | 5 | 5 - 20 | 100-150 | 100-150 | 160 | 22 |
| 1600x1600 | 190 | 5 | 5 - 20 | 170-210 | 190-250 | 250 | 35 |
| 1800x1800 | 190 | 5 | 5 - 20 | 250-270 | 280-310 | 315 | 49.7 |
Advantages of fine sand making crusher
1: Feeding size: 120mm-300mm
2: More than 90% of final products below 5mm
3: Even particle size, higher output, more durable plate hammer
4: Lower motor power, no need the third crushing.
5: Simple structure, easy maintenance and stable running
6.Low cost and a good alternative to replace expensive and energy
consume VSI crusher.
Spare parts
The main spare parts of fine sand crusher is rotor and hammer,
which are the wear spare parts, need to changed reguarly. The fine
sand crusher hammer is made of high chrome alloy, whose hardness is
62 to 65 HRC, can last longer 2 or three times than common hammer.
