10 To 50 Ton Per Hour Horizontal Shaft High Efficiency Fine Sand
Making Crusher Machine
High-efficiency fine crusher, also known as fine crusher, is
especially suitable for making fine and medium crushed gravel,
refractories, cement, quartz sand, steel sand and other hard and
brittle materials. It is an efficient and energy-saving sand making
equipment. Compared with the traditional fine crusher, it is a more
advanced, effective, reliable and practical fine crusher equipment,
and it is also the best-selling equipment.
Working principle
The material enters the cavity and falls on the high-speed rotating
movable hammer. After the action between the hammer and the
counterattack, the material is initially broken in the hammering
zone. After repeated high-frequency hammering and counterattack,
the fine materials go through the grate.The oversized materials are
recrushed inside the crushing cavity until it can go through the
grate. Therefore, the material undergoes multiple times of
composite hit and crushing, thereby achieving the fine crushing
effect.
Specifications
| Model | Rotation speed
of main shaft
r/min | Quantity of
hammers | Diameter
of rotor
(mm) | Length
of rotor
(mm) | Input size
(mm) | Output size
(mm) | Capacity
(t/h) | Motor Power
(kw) | Dimension
(m) |
| 800×400 | 860 | 12 | 800 | 400 | ≤120 | 5 | 30-40 | 45 | 2.1x1.4x1.7 |
| 800×600 | 860 | 18 | 800 | 600 | ≤180 | 5 | 40-50 | 55 | 2.1x1.62x1.7 |
| 800×800 | 860 | 24 | 800 | 800 | ≤180 | 5 | 50-70 | 55 | 2.1x1.84x1.96 |
| 1010×1010 | 720 | 30 | 1010 | 1010 | ≤180 | 5 | 60-75 | 75 | 2.1x1.84x1.96 |
| 1200×1000 | 590 | 30 | 1200 | 1000 | ≤180 | 5 | 100-110 | 110 | 2.45x1.6x1.96 |
| 1200×1200 | 590 | 24 | 1200 | 1200 | ≤180 | 5 | 120-150 | 132 | 3.0x2.16x2.5 |
| 1400×1400 | 540 | 24 | 1400 | 1400 | ≤180 | 5 | 160-200 | 160 | 3.0x2.36x2.55 |
| 1600×1600 | 460 | 24 | 1600 | 1600 | ≤190 | 5 | 180-250 | 250 | 3.0x2.76x2.5 |
| 1800×1800 | 420 | 24 | 1800 | 1800 | ≤190 | 5 | 220-290 | 315 | 3.0x3.26x3.15 |
Advantages of fine sand making crusher
1: Feeding size: 120mm-300mm
2: More than 90% of final products below 5mm
3: Even particle size, higher output, more durable plate hammer
4: Lower motor power, no need the third crushing.
5: Simple structure, easy maintenance and stable running
6.Low cost and a good alternative to replace expensive and energy
consume VSI crusher.
Spare parts
The main spare parts of fine sand crusher is rotor and hammer,
which are the wear spare parts, need to changed reguarly. The fine
sand crusher hammer is made of high chrome alloy, whose hardness is
62 to 65 HRC, can last longer 2 or three times than common hammer.
