0.5 ton to 5 ton per hour small ceramic batch ball mill grinding
machine
Ceramic batch ball mill is used for fine grinding of
feldspar,quartz,clay,ore and so on.The ceramic ball mill is a kind of batch mill, which means it will
grind the material for some time without discharging until the
mateiral reach the desired sizes.The fineness of the grinding operation is controlled by the
grinding time.
The biggest difference between ceramic ball mill and common ball
mill is lied in the structure and lining.
1.Ball mill usually refers to continuous feed and discharging type
with a feed end and a discharge section,while the batch ball mill
is a batch feed, and there is only one hole in the middle of the
cylinder,which is both discharged and fed.
2.After the material is ground into desired sizes,the material is
discharged,and the material to be grounded next time is added to
batch ball mill.
3.There is also a ceramic ball mill without a large ring gear,which
is driven by a motor to drive the belt reducer to rotate the
cylinder to complete the grinding operation.The ceramic ball mill liner is made of ceramic,silica and rubber to
ensure the purity of the discharge.
Specifications
| Model | Capacity
(t/h) | Cylinder speed
(r/min) | Motor power
(kw) | Weight
(t) |
| TCQ910×1120 | 0.2 | 36 | 5.5-11 | 3.0 |
| TCQ1200×1400 | 0.5 | 32 | 11-18.5 | 3.8 |
| TCQ1500×1800 | 1.0 | 28 | 15-22 | 4.5 |
| TCQ1800×2100 | 1.5 | 26 | 18.5-30 | 6.0 |
| TCQ2100×2100 | 2.5 | 22 | 22-37 | 7.4 |
| TCQ2500×2900 | 5.0 | 16 | 37-55 | 9.3 |
| TCQ2800×3700 | 8.0 | 14.5 | 55-75 | 12.5 |
| TCQ3000×3700 | 10 | 14 | 75-90 | 18.6 |
Ceramic batch ball mill liners and ceramic balls
Customer working site
