MJK Smart Door Lock Biometric living detectionConstruction Entrance
Access Control Face Recognition Terminal Device
Precautions
- The temperature measuring device should be used in a room with a
room temperature between 10 °C-40 °C. Do not install the
temperature measuring device under the vent, and ensure that there
is no heating source within 3 meters;
- Personnel entering the room from a cold outdoor environment will
affect the temperature measurement accuracy. The forehead
temperature test should be performed after the forehead is
unobstructed for three minutes and the temperature is stable;
- The temperature read by the temperature measuring device is the
temperature in the forehead area. When there is water, sweat, oil
or thick makeup on the forehead or the elderly have more wrinkles,
the read temperature will be lower than the actual temperature.
Make sure there is no hair or clothing covering this area.
Application:
Applicable to office areas, gates, hotels, office buildings,
schools, etc. where face recognition gates are required.
Characteristics:
Support external HDMI large screen;
Support external ID card / IC card reader;
Support serial port input and output, support Wiegand output,
output content supports configuration;
Supports optional card swipe module (the white area below is the
swipe area), also Facial plus Card module can be achieved;
Dynamic face detection and tracking recognition algorithm based on
video stream;
Supports storage of 50,000 facial photos and 1 million
identification records;
1:N recognition accuracy is high; (97% pass rate, the accuracy rate
is 99.7%);
Face matching can be achieved with the optional swipe module;
The recognition speed is fast, the face tracking and detection
takes about 20ms, the face feature extraction takes about 300ms,
and the face comparison takes about 0.1ms.;
Support stranger detection, stranger level configurable;
Support for live photo preservation when face recognition or
stranger detection;
Support interface docking;
Support customization;
Support screen display content configuration;
Support recognition distance configuration;
MJK ELECTRONICS CO., LTD
was established in 2005. Our company is located in shenzhen, China.
Our company is a professional Hi-Tech enterprise engaged in all
kinds of LCD digital signage displays such as outdoor
kiosks,interactive touch kiosks, touch screen table ,wall mounted
displays, floor standing displays,, LCD monitor ,videowall, etc.
which are the most widely using media in retail, shopping center,
restaurant, hotel, bank, building, airport, showroom etc.
We have a professional and precise technical support team,
including software development engineer, electronic engineer,
construction engineer, who are outstanding in the digital signage.
As one of the leading company in digital signage, MJK offers very
innovative, stylish, and full-function products, which are welcome
by the clients from over fifty countries and areas.
MJK always takes the strict QMS system to control quality for Zero
Fault, so as to meet various standards from clients worldwide. Our
products acquire CE, FCC, ROHS,3C certifications so far.
Having rich experience in OEM & ODM cooperation, we are capable of
offering you factory price with guaranteed quality as well as
complete after-sale service. We have and will always try our best
to meet every possible demand of our customers.
