Metal Cutting Tungsten Carbide Sandblast Nozzles , Rotating Water
Jet Nozzle
Introduction
Name: Sand mixing pipes are also called sand mixing pipes, sand
pipes, sand knife pipes, sand knife pipes, sand nozzles, sand
nozzles, sand nozzles or abrasive nozzles. English Nozzles or
Mixing Tubes.
Specification: There are many specifications for sand mixing pipe.
It is mainly reflected by three values of outer diameter, inner
diameter and length, namely D * D * L. for example
sand blasting nozzle ,also name tungsten carbide water
cutting,tungsten carbide sand tube.it is mainly using to cutting
metal,ceramic,stone,glass or other materials.
spcifications:
Use superfine nanometer tungsten carbide particles, the
wear-resisting performance to the next level, superior
wear resistance makes it far beyond the ordinary tungsten
carbide,The service life of the nozzle.Cobalt
content of less than 0.6%, density of 15.45 g/cm3 ~ 15.6 g/cm3,
bending 2000 mpa to 2400MPa.Super oxygen resistance, small thermal
expansion coefficient, unique high hardness and density, far beyond
the other similar products, the use of hard Alloy tube abrasion
resistance stronger.
Sand tube due to high-speed abrasive particle erosion, its
selection is very important.Sand tube material, in general, must
have high hardness, high resistance Grinding, both be short of one
cannot.Generally for tungsten carbide composite materials
processing.Usually, cemented carbide, WC as the main
resistance,Grinding phase exists in the form of particles, CO, just
as the binder.
Use: widely used in various types machine, WHP type, FLOW type,
type JET, KMT, OMAX type, type WS.
Application
1. Metal cutting
2. Ceramic cutting
3. Stone cutting
4. Glass cutting
