Corrosion Resistance Tungsten Carbide Nozzle 96.5 HRA Density
15.66g/Cm³
Tungsten Carbide Nozzle Advantage
Advantages of cemented carbide nozzle: corrosion resistance, long
service life, excellent performance, high-cost performance, not
easy to wear.
Carbide nozzles and other nozzles: common nozzle materials include
cast iron, ceramics, tungsten carbide, silicon carbide, boron
carbide. Ceramic nozzles are only used in nonaggressive light
equipment and blast cabinet abrasives. Tungsten, silicon and boron
carbide have become the most popular blasting applications due to
their long service life. Our company mainly produces tungsten
nozzles.
Tungsten Carbide Nozzle spcifications:
Use superfine nanometer tungsten carbide particles, the
wear-resisting performance to the next level, superior
wear resistance makes it far beyond the ordinary tungsten
carbide,The service life of the nozzle.Cobalt
content of less than 0.6%, density of 15.45 g/cm3 ~ 15.6 g/cm3,
bending 2000 mpa to 2400MPa.Super oxygen resistance, small thermal
expansion coefficient, unique high hardness and density, far beyond
the other similar products, the use of hard Alloy tube abrasion
resistance stronger.
Sand tube due to high-speed abrasive particle erosion, its
selection is very important.Sand tube material, in general, must
have high hardness, high resistance Grinding, both be short of one
cannot.Generally for tungsten carbide composite materials
processing.Usually, cemented carbide, WC as the main
resistance,Grinding phase exists in the form of particles, CO, just
as the binder.
Use: widely used in various types machine, WHP type, FLOW type,
type JET, KMT, OMAX type, type WS.
Our advantages of service:
1.Sales staff beyond 5 years' in this field with good understanding
and fluent english.
2.Prompt reply within 24 hours with experienced suggestions.
3.Samples below 20 usd are all free in the occasion with your
shipping cost.
The nozzle is a device designed to control the direction or special
gas flow (especially increase speed) of an object when it enters
(or exits) a closed cavity or pipe. On the nozzle side, the carbide
nozzle is the most durable and cost-effective.
