Micro force transducer 200lb 100lb 50lb 20lb tension measurement
sensor
Micro force transducer FSSM offers a compact design for a variety of applications. the S
Beam Load Cell series provides accuracy, compact design features,
and a wide capacity range from 10N to 1000N to choose from.The mini
load cell FSSM utilizes metal foil strain gauge technology to
deliver 2.0mV/V output with maximum 0.1% non-linearity of the full
scale,the compact design enables the FSSM to be easily embedded
into machinery or test equipment – ideal for packaging machinery,
assembly machinery or end-of-line test equipment.The sensor
features threaded holes on two sides for the mounting of
attachments or implements,this micro force sensor can be used for
both tension and compression force measurement in applications with
limited mounting space.You may find junior S beam load cell FSSM
interchangeable with FUTEK load cell LSB200,Mark Miniature Force
Sensors Series R04,flintec s-beam force sensor ISA,flintec load
cell ISB,etc..In addition to the standard specifications,model FSSM
can also be modified or customized to better fit clients'
applications.
Dimensions(in milimeter)
Ordering code
| Part No. | Force measuring range | Force measurement direction |
| FSSM-10N | 0-10N / 0-1kgf | Tension/compression |
| FSSM-20N | 0-20N / 0-2kgf |
| FSSM-50N | 0-50N / 0-5kgf |
| FSSM-100N | 0-100N / 0-10kgf |
| FSSM-200N | 0-200N / 0-20kgf |
| FSSM-300N | 0-300N / 0-30kgf |
| FSSM-500N | 0-500N / 0-50kgf |
| FSSM-1kN | 0-1000N / 0-100kgf |
Specifications
| Capacity | 10N / 1kg / 2.2 lbf
20N / 2kg / 4.4 lbf
50N / 5kg / 10 lbf
100N / 10kg / 20 lbf
200N / 20kg / 45 lbf
300N / 30kg / 65 lbf
500N / 50kg / 110 lbf
1kN / 100kg / 220 lbf |
| Rated output | 2.0mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% R.O. |
| Hysteresis | ±0.1% R.O. |
| Nonrepeatability | ±0.05% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø2*4000mm 4-core shielded |
| Wiring code | Compression@
Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Load Cell:A device which produces an output signal proportional to
the applied weight or force.
Excitation: The voltage applied to the input terminals of the load
cell.
Rated Capacity: The maximum axial load the load cell is designed to
measure within its specifications.
Non-linearity: The maximum deviation of the calibration curve from
a straight line drawn between the no-load and rated outputs;
expressed as a percentage of the rated output and measured on
increasing load only.
Non-repeatability: The maximum difference between load cell output
readings for repeated loadings under identical loading and
environmental conditions.
Hysteresis: The maximum difference between load cell output
readings for the same applied load; one reading obtained by
increasing the load from zero and the other by decreasing the load
from rated output; usually measured at half rated output and
expressed in percent of rated output.
Creep: The change in load cell output occurring with specified
period of time, while under load, and with all environmental
conditions and other variables remaining constant; usually measured
with rated load applied.
Safe Overload: The maximum load in percent of rated capacity which
can be applied without producing a permanent shift in performance
characteristics beyond those specified.
Ultimate Overload: The maximum load in percent of rated capacity
which can be applied without producing a structural failure.
Operating Temperature: The extremes of temperature within which a
load cell will operate without permanent adverse change to any of
its performance characteristics.
Temperature Shift Span: The change in output due to a change in
load cell temperature; usually expressed as a percentage of load
per degree Celsius change in temperature.
Temperature Shift Zero: The change in zero balance due to a change
in ambient temperature; usually expressed in percent of rated
output per degree Celsius change in temperature.
Input Resistance: The resistance of the load cell bridge circuit
measured at the positive and negative excitation terminals with no
load applied and with the output terminals open-circuited.
Output Resistance: The resistance of the transducer bridge circuit
measured at the positive and negative signal terminals with no load
applied and with the input terminals open-circuited.
Micro force transducer 200lb 100lb 50lb 20lb tension measurement
sensor
Click here to download datasheet
