Sintered Metal Fiber Hot Gas Filter Element For Dust Removal
Production description:
It is made of metal fibers with a micron diameter through non-woven
laying, stacking, and high-temperature sintering, and then rolled
and welded. The main materials are stainless steel 316L, stainless
steel 310S, iron chromium aluminum alloy, etc.
Effectively avoids the disadvantages of non-woven filter bags that
are not resistant to high temperature, ceramic filter elements and
sintered powder elements are brittle.
Product feature:
1. High temperature resistance(400 ℃), strong thermal shock
resistance, corrosion resistance, high strength
2. High interception efficiency, emission concentration can be
lower than 5mg / Nm3
3. Good air permeability, reduced initial pressure, low energy
consumption
4. Handling high wind speed (≥1 m/min)
5. Online backflush and offline cleaning, good regeneration effect
6. Long working life: no clogging
7. Conductive to avoid dust explosion caused by static electricity
8. The filter material is resistant to high temperatures and can
effectively prevent bag burning
9. Easy to recycle and avoid secondary pollution
10. Dust removal system volume and footprint can be significantly
reduced
Technical parameters:
| Product ID | OD (mm) | Length (mm) | Filtration area (m2) | Supporting tube | Temperature (°C) |
| XLMFF-1500 | 130/160 | 1500 | 0.61 / 0.75 | Perforated tube/ Support cage | <400 |
| XLMFF-3000 | 3000 | 1.22 / 1.50 |
| XLMFF-4000 | 4000 | 1.63 / 2.01 |
| XLMFF-5000 | 5000 | 2.04 / 2.51 |
| XLMFF-6000 | 6000 | 2.45 / 3.01 |
| XLMFF-7000 | 7000 | 2.85 / 3.51 |
Main application:
1. Hot gas filtration during the production of Magnesium Oxide,
Alumina
2. Catalyst or precious metal recovery in gas processes
3. Power,Steel,Cement,Glass,Chemical,Metallurgical Industry
4. Biomass energy
Production and Installation site:
Packaging:
