2 Layer Thick Copper PCB , Material FR4 S1000 , 3/3OZ Copper , Red
Solder Mask
2 Layer Thick Copper PCB
PCB Specifications:
Layer Count: 2 Layer PCB
Material: FR4, S1000
Board Thickness: 1.6MM
Min Hole: 0.3MM
Min Trace: 8/8Mil
Copper: 3/3OZ
Solder Mas: Red
Unit Size: 200MM*1120MM/1pcs
Surface Treatment: OSP
Application: Power Supply
Capabilities:
| Item | Capability |
| Layer Count | 1-24 Layers |
| Board Thickness | 0.1mm-6.0mm |
| Finished Board Max Size | 700mm* 800mm |
| Finished Board Thickness Tolerance | +/-10% +/-0.1(<1.0mm) |
| Warp | <0.7% |
| Major CCL Brand | KB/NanYa/LTEQ/ShengYi/Rogers Etc |
| Material Type | FR4,CEM-1,CEM-3,Aluminum,Copper,Ceramic, PI, PET |
| Drill Hole Diameter | 0.1mm-6.5mm |
| Out Layer Copper Thickness | 1/20Z-8OZ ; |
| Inner Layer Copper Thickness | 1/3OZ-6OZ |
| Aspect Ratio | 10:1 |
| PTH Hole Tolerance | +/-3mil |
| NPTH Hole Tolerance | +/-1mil |
| Copper Thickness Of PTH Wall | >10mil(25um) |
| Line Width And Space | 2/2mil |
| Min Solder Mask Bridge | 2.5mil |
| Solder Mask Alignment Tolerance | +/-2mil |
| Dimension Tolerance | +/-4mil |
| Max Gold Thickness | 200u'(0.2mil) |
| Thermal Shock | 288C, 10s, 3 Times |
| Impedance Contro | +/-10% |
| LTest Capability | PAD Size Min 0.1mm |
| Min BGA | 7mil |
| Surface Treatment | OSP, ENIG, HASL, Plating Gold, Carbon Oil,Peelable |
FAQ:
Question: What is the standard format you accept?
Answer: We accept standard gerber format file.
Question: What is the application area of your products?
Answer: Our products are widely used in many areas, such as
consumer electronics( ANC earphone, tws earphone, blue-tooh module
etc), automobile, industrial control, power supply products,
communication products, LED Lights, printers, mobile phone, medical
equipments etc.
Question: Do you have MOQ requirements?
Answer: Because PCB is customized products, so we do have MOQ
requirements. But the MOQ rquirement is not strict and it differs
from case to case.
