Product Description
Drum-shaped gear ring gear is the same number of teeth by the ring
and the outer teeth of the flange half coupling and other
components.
Foreign teeth are divided into straight and drum teeth two
tooth-shaped, the so-called drum teeth is made of spherical teeth.
The center of the sphere is on the gear axis, The tooth side gap is
larger than the normal gear, and the drum-shaped gear coupling can
allow larger angular displacement (relative to the straight
coupling) to improve the contact condition of the teeth, improve
the transmission torque and prolong the service life. Angular
contact state along the tooth width.
Flexible Gear Coupling , minimum backlash between shaft ends,
possible applications: e.g. sluices, coal braker, metal planning
machine.
Advantages
1. Suitable for medium and large power shaft drive
2. Large transmission torque. At the same torque, most of the
rotation diameter is smaller than the gear coupling, small in size
and light in weight. It can partially replace the gear coupling.
3. Compared with toothed coupling, it has simple structure, fewer
component parts, more convenient manufacturing, and no gear
processing machine is needed.
4. Easy maintenance, longer life, nylon pin can be replaced after
removing the baffle.
5. Poor vibration reduction energy and high noise
Application
Suitable for continuous operation of industrial process power
equipment, mainly used in transmission shaft systems that require
vibration damping and buffering and compensation of the relative
displacement of the two axes.
