Fully Automatic Control Baby Diaper Production Line / Diaper
Manufacturing Machine
Main Features
1.Hard steel frame ,six sides processed ,steel thickness is 30mm.
2.Crushing System:HMH high speed crusher machine
3.Cotton core forming system
4.SAP dosing unit
1)Capacity: 2-10g per piece
2)Controlled by servo motor, the weight can be set and adjusted on
the touch screen related to different product demand.
3)SAP is dosed in to the cage by double screws and mixed with pulp
4)SAP is dosed quantitatively, continuously and evenly.
5)Limit detection alarm
6)Add SAP into the bucket automatically through electronic eye
detection .
Product Specification
1. Machine can produce both Fluff and ultra-thin type baby diapers
in 4 sizes (S, M,L,XL ) .
3. Diaper features with elastic waistband materials , S cutting
tape, leak guard proof , wet indicator, ADL .
4. Raw material used : Hydrophobic N.W., Hydrophilic N.W. , ADL
,upper and lower tissue paper, back sheet, leg elastics, standing
cuff elastics, frontal tape, S cutting Velcro tapes.
Main Technical Parameter
1. Designed speed:600pcs/min
2. Stable production speed:500pcs/min(M size)
3. Centre distance: 300mm
4. Raw material layout: Absorption sheet on top and laminated film
on bottom.
5. Tolerance of diaper weight: ±1.5g
6. Qualified rate:≥97%(excluding defectives from hot-melts and
spliced)
7. Efficiency:≥85%
8. Power:380V/50HZ,Tri-phase four wires + earth wire
9. Machine power:300KW Approximately(excluding hot melt adhesive
machine and air compressor)
10. Air pressure:1000 liter/min,6~8BAR
11. Machine space : 40 m×9 m×4 m (For reference only)
12. Weight: 75 Tons Approximately
13. Machine direction:defined by customer.
14. Machine color: As per customer request.
Main parts supplier
| Name | Brand |
| PLC | MITSUBISHI |
| Touch screen | MITSUBISHI |
| Web guider | BST |
| Opto-electric switch | Sick |
| Temperature control meter | Schneider |
| Low voltage electric | Schneider |
| Solid state relay | FOTEK |
| Pneumatic parts, valve and cylinder | AIRTAC |
| Key bearings | NSK&NTN |
| Timing belts | GATES |
| Flat belts | Esbelt-Spanish |
| Main roller (T15) | China |
| Servo Motor | Mitsubishi-Japan |
After-sales service
1. Provide complete mechanical instruction in English and Chinese
2. Training how to install the machine, training how to use the
machine.
3. Engineers available to service machinery overseas.
You are welcome to make an enquiry with us.
Contact me, get the latest design and best price!
