Flange Type Turbine Flow Meter with Explosion Proof DN80 Low Price
1. Introduction
LWGYML series turbine flow meter is a new generation kind of flow
meter that absorbs the advanced technologies of flow meter at home
and abroad. It has been optimized and designed to have so many
characteristics, such as simple structure, light weight, high
precision, good repeatability,easy installation and usage.
It is widely used in the sealed pipelines which doesn’t have
corrosion function on SS 1Cr18Ni9Ti, 2Cr13, corundum Al2O3 and cemented carbide and have no fiber, particle and so on. The
liquid should be less than 5*10-6m2/s with viscosity under working temperature, if the viscosity of
the liquid is more than 5*10-6m2/s, then the flow meter can be used after calibration. If it is
equipped with other display devices with special functions, it can
also do quantity control, excessive alarm and so on. It is really
perfect in flow measurement and energy
conservation.
2. Features
- High accuracy, usually reach ±1%R,±0.5%R,or even reach ±0.2%R for
high-precision type.
- Good repeatability, it can reach 0.05%-0.2% in short term, if
regular calibration or online calibration can get an extremely high
accuracy, so it is preferred in foreign trade.
- Pulse signal output, it is suitable for totalizer measurement and
computer connection, no zero drift,strong capacity of resisting
disturbance.
- High frequency signal(3-4KHz), strong signal resolution.
- Wide range, middle and big diameter can reach 1:20, and small
diameter can reach 1:10.
- Compact structure, easy installation and maintenance.
3. Application
Turbine flowmeter is widely used in the following measurement
objects: petroleum, organic liquid, inorganic liquid, liquefied
gas, natural gas, coal gas and cryogenic fluid. In foreign
countries, liquefied petroleum gas, refined oil and light crude oil
are used for trade settlement in the first and last stations of
large crude oil pipelines. In Europe and the United States, turbine
flowmeter is second only to orifice flowmeter, while in the
Netherlands alone, more than 2,600 turbine flowmeters with various
sizes and pressures ranging from 0.8MPa to 6.5MPa have been used in
natural gas pipelines, and they have become excellent natural gas
flowmeters. Although the excellent metering characteristics of
turbine flowmeter are favored by people, it gives people the
impression that it is made up of moving parts and has a short
service life, so it is inevitable to hesitate when choosing them.
After people's unremitting efforts, it should be said that the
situation has changed greatly. As the most universal flowmeter, the
turbine flowmeter has developed into a mass production scale with
multiple varieties, full series and multiple specifications.
Turbine flowmeter is widely used in some special departments
besides the aforementioned industrial departments, such as
scientific research and experiment, national defense science and
technology, and metering departments. The use of these fields just
avoids its weakness (not suitable for long-term continuous use) and
gives full play to its characteristics (high precision, good
repeatability, and can be used in high pressure, high temperature,
low temperature and micro-flow conditions). In these fields, most
of them are designed according to the special requirements of the
measured objects, and they are special instruments without mass
production.
4. Flow Range & Work Pressure
| Pipeline Diameter | Normal Flow Range
(m³/h) | Extended Flow Range
(m³/h) | Normal Pressure
(MPa) | Pressure Rate(MPa)
(Flange Connection) |
| DN4 | 0.04~0.25 | 0.04~0.40 | 6.3 | 12,16,25 |
| DN6 | 0.10~0.60 | 0.06~0.60 | 6.3 | 12,16,25 |
| DN10 | 0.20~1.20 | 0.15~1.50 | 6.3 | 12,16,25 |
| DN15 | 0.60~6.00 | 0.40~8.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN20 | 0.80~8.00 | 0.45~9.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN25 | 1.00~10.00 | 0.50~10.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN32 | 1.50~15.00 | 0.80~15.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN40 | 2.00~20.00 | 1.00~20.00 | 6.3,2.5
(Flange Connection) | 4.0,6.3,12,16,25 |
| DN50 | 4.00~40.00 | 2.00~~40.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN65 | 7.00~70.00 | 4.00~70.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN80 | 10.00~100.00 | 5.00~100.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN100 | 20.00~200.00 | 10.00~200.00 | 1.6 | 4.0,6.3,12,16,25 |
| DN125 | 25.00~250.00 | 13.00~250.00 | 1.6 | 2.5,4.0,6.3,12,16 |
| DN150 | 30.00~300.00 | 15.00~300.00 | 1.6 | 2.5,4.0,6.3,12,16 |
| DN200 | 80.00~800.00 | 40.00~800.00 | 1.6 | 2.5,4.0,6.3,12,16 |
5. Installation Dimension
According to the diameter, choose thread or flange connection to
install the senor. As to installation method, please check Pic4,
Pic5, Pic6.
Pic4 LWGYML-4~10 Structure & Installation Dimension Diagram
Pic5 LWGYML-15~40 Structure & Installation Dimension Diagram
Pic6 LWGYML-50~200 Structure & Installation Dimension Diagram
| Pipeline Diameter | L | Thread Connection | Flange Connection |
| (mm) | G | D
(mm) | d
(mm) | n |
| DN4 | 295 | G1/2 | | | |
| DN6 | 330 | G1/2 | | | |
| DN10 | 450 | G1/2 | | | |
| DN15 | 75 | G1 | θ65 | θ14 | 4 |
| DN20 | 80 | G1 | θ75 | θ14 | 4 |
| DN25 | 100 | G1-1/4 | θ85 | θ14 | 4 |
| DN32 | 120 | G2 | θ100 | θ14 | 4 |
| DN40 | 140 | G2 | θ110 | θ18 | 4 |
| DN50 | 150 | | θ125 | θ18 | 4 |
| DN65 | 170 | | θ145 | θ18 | 4 |
| DN80 | 200 | | θ160 | θ18 | 8 |
| DN100 | 220 | | θ180 | θ18 | 8 |
| DN125 | 250 | | θ210 | θ25 | 8 |
| DN150 | 300 | | θ250 | θ25 | 8 |
| DN200 | 360 | | θ295 | θ25 | 12 |
6. Configuration
| LWGYML Series Turbine Flow Meter Configuration |
| Model | LWGYML |
| Pipe Material | 4 | 4mm |
| 6 | 6mm |
| 10 | 10mm |
| ...... | |
| 200 | 200mm |
| Model Description | N | No Display,12VDC Power Supply,Pulse Output, High Level≥8V Low
Level≤0.8V |
| A | No Display,4-20mA 2 Wired Current Output |
| B | Local Display,Battery Operated |
| C | Local Display,4-20mA 2 Wired Current Output |
| C1 | Local Display,RS485 Output |
| C2 | Local Display, HART Output |
| Accuracy | 05 | 0.5 Grade |
| 10 | 1.0 Grade |
| Turbine Type | W | Extended Ratio |
| S | Standard Ratio |
| Material | S | SS 304 |
| I | SS 316(L) |
| Explosion Proof | N | None |
| E | Explosion Type(ExmIICT6 or ExdIIBT6) |
| Pressure Rate | N | Normal Pressure |
| H | High Pressure |
| Connection Type | T | Thread Connection |
| F | Flange Connection |
| Filter | N | None |
| F | With Filter |
