None-woven Melt blown cloth for / cloth/ Slitting Machine
Detail description: suitable for cloth, Melt blown for , Non-woven
fabric for slitting and rewinding.
Fabric Slitting Rewinding Machine
This machine was specially designed to cut Interlining Woven and
Non-woven Fabric Rolls. This machine comes with Manual Rack system
or PLC base Servo drive Automatic Cutting arrangement. It can slit
Min 20mm Roll Widths and above. We have designed special mechanical
rack system to cut fix size roll with 2mm tolerance or PLC driven
fully automatic with lmm tolerance.
Characteristics:
1. The two rewinding motors cooperate with the main motor to work
as three motors motion control, the main motor blocks the unwinding
and the rewinding motor control the tension, the tension of the
finished product is stable, good rewinding appearance.
2. The rewinding arm adopts the pneumatic coupling control the
balance, the contact pressure can be adjusted automatically during
rewinding, the contact pressure can be set. This machine can also
be equipped with discontinuous rewinding, cut other materials more
widely.
3. The operation interface adopts LCD touch screen, various
rewinding conditions and working conditions can be set directly on
the screen, the control part adopts PLC to control the machine
operation, with self-test system.
4. The machine drive uses AC motor and frequency inverter;
acceleration and deceleration are stable and fast.
5. Optional with slat type air pressure shaft and pneumatic
friction shaft, suitable for more material range, the shaft change
is specially designed, can be change at any time.
6. Auxiliary discharge device, the material outfeed pass surface
impression roll, material more even, and reduce the noise (suitable
for adhesive material)
7. Separate type unwinding stand, for bigger unwinding diameter.
