Automatic Glass Bottle Washing Machine / Rinsing Inside Brushing
System
Glass bottle washing machine description:
Automatic bottle washing machine set, used for a variety of
specifications of new, old beer, wine, beverages, large infusion
bottle cleaning; A set of units can be with the filling machine,
the capping machine into washing bottles, filling, capping
automatic line supporting production, according to the needs of
users, can also provide a single machine, complete a single
cleaning function
The cleaning process of the bottle is as follows:
Bottle inlet - Soak spray - - Brush - Spray with clean water - -
Drain -- Bottle outlet
Among the process: the temperature of hot alkaline water is 50-75℃,
and the concentration of alkaline water is about 2.5%
Liquid bottling machine parameters:
| No | Item | Details |
| 1 | Capacity | 5000-9000 bottles per hour |
| 2 | Bottle size | ø50—ø82mm |
| 3 | Bottle height | 180—290mm |
| 4 | Bottle mouth inside diameter | Large than 15mm |
| 5 | Labeling removing rate | Large than 95% |
| 6 | Bottle cleaning rante | Large tha 92% |
| 7 | Bottle broken rate | Less than 0.9% |
| 8 | Machine weight | About 4000KG |
Glass bottle washing machine details:
Bottle soaking:
After the bottle enters the soaking machine, the spray pipe group
first carries on the pre-spray to the inside and outside surface of
the bottle, causes the bottle to be heated evenly, then, carries on
the following process: the high-pressure spray bottle inside and
outside -- pours out the bottle the partial sewage -- immerses --
pours out the sewage -- the bottle circulation 3-4 times, after
such treatment the bottle, the trademark and the dirt has been
removed.
Cleaning and draining inside the bottle:
Brush inside the bottle into the drain machine, with drum for
intermittent rotation, when the bottle in a horizontal position,
body by high speed rotating brush to brush the bottle to drive into
the bottle washing, washing, brush, roller turned an Angle and
installed on the frame of a row of sprinkler spray to tap water in
the bottle, namely when the bottle in a vertical downward position,
by water valve automatic control of another exhaust nozzle is to
enter the spray bottle, and then into a drain, drain after cleaning
the bottle was sent out.
Main mechanism and working principle of bottle feeding machine:
Bottle feeding machine is mainly composed of nose, tail, side
plate, flat-top sprocket, flat-top chain, railing, tensioning
mechanism and machine foot.
The power is input by the motor after decelerating, and the
flat-top chain is driven by the flat-top sprocket.
After the bottle is loaded on the bottle feeding machine, namely
with the movement of the flat top chain, the conveying of the
bottle is completed. The conveying speed is 10 meters/min, and it
can also be adjusted according to the needs. The width and height
of the railing can be adjusted according to the specifications of
the bottle.
Thanks!
For more information please contact us!
