4718 - 100 mm mesh pad demister in 316SS material custom order
Mesh pad demister introduction:
It is used in removing droplets entrained in flow gas, is
constructed from knitted wire mesh with a cellular structure. The
knit mesh are made into a mesh pad with determinate thickness and
diameter, through which the two phases liquid-gas or liquid-vapor
are disengaged.
From the statistic data obtained both in laboratory tests and
industrial applications, it shows that the proper designed mesh pad
demister allows a separation of liquids carried by gas with
efficiency reaching 99.9%.
Mesh Pad Demister Specification in this case
| Item | Value | Unit |
| Material | 316SS | / |
| Shape & Size | Φ4718 | mm |
| Mesh Thickness | 100 | mm |
| Demsiter Height | 150 | mm |
| Wire Diameter | 0.23 | mm |
| Mesh Density | 128 | kg/m3 |
| Void Fraction | 0.984 | / |
| Specific Area | 278 | m2/m3 |
| Grids | 25*3 flat bar | mm |
Mesh pad demister Material:
- SS304, for water solutions, Nitric acid reduced crude petroleum fraction
etc.
- SS316L, for fatty acid reduced crude containing naphthenic acids
and corrosive chemicals.
PP(Polypropylene), for corrosive service at temperature up to 70℃.
PTFE, for corrosive service at temperature of (-190℃, 250℃).
Monel, for caustic soda, dilute acid.
Nickel, for caustic Soda, food products.
Copper, for Freon, alcohol.
Aluminium, for Nitric Acid.
Mesh pad demister Advantages:
Simple installation; Low pressure loss; 90% to 99.9% efficiency;
Little maintenance is required; Elimination of liquid product loss;
Essential improvement of vapor phase quality; Dimensions and
configurations are not limited; Contacting surface area is larger
than the specific gravity; No direct power is required since the
equipment has no operating parts; Compact equipment can be used in
accordance with increased production capacity;
With 12 years' experiences, team is ready to provide considered
service! Welcome your contact!
