Uniform Feeding U Trough Screw Conveyor Low Power Consumption
Industrial Grade
Characteristics of Auger Conveyor
Screw conveyor is a kind of continuous transportation equipment. It
uses a rotating screw to transport the transported material along
the fixed housing, which is like the nut stuck when the screw
rotates and can only move transversely along the screw, and the
force that causes the material not to rotate with the screw is the
gravity of the material and the friction force on the housing.
1. The structure is relatively simple and the cost is low;
2. Reliable work, simple maintenance and management;
3. The size is compact, the section size is small, the occupation
area is small;
4. It can realize sealed transportation, which is beneficial to the
transportation of materials that are easy to fly, hot and smelly,
and can reduce the pollution to the environment.
5. Easy to load and uninstall. The horizontal screw conveyor can be
loaded and unloaded at any point on its transmission line;
6. The unit energy consumption is large;
7. The material is easy to grind and wear in the process of
transportation, and the wear of spiral blade and material groove is
also more serious.
Application and Working Principle of Auger Conveyor
U-type screw conveyor is widely used in chemical, metallurgy, paper
making, and construction industries. The equipment is suitable for
field flowing work, such as concrete mixing station, bulk material
transit storage and etc.
U-type screw conveyor is made up of screw part, bearing part and
driving devices. Screw part is supported by both ends of bearing
and middle bearing and driven by driving devices. When the screw
conveyor operate, handling material will come into the feed chute
by inlet, then do axial movement along the chute under the action
of rotate screw until out of the outlet.
Technical parameter of Auger Conveyor
| Model | Diameter mm | Pitch mm | Speed r/min | Standard Capacity(m3/h) | Speed r/min | Standard Capacity(m3/h) | Speed r/min | Standard Capacity(m3/h) |
| φ0.45 | φ0.33 | φ0.15 | φ0.45 | φ0.33 | φ0.15 | φ0.45 | φ0.33 | φ0.15 |
| LS200 | 200 | 200 | 100 | 16.9 | 12.4 | 5.6 | 80 | 13.5 | 9.9 | 4.5 | 63 | 10.7 | 7.8 | 3.6 |
| LS315 | 315 | 315 | 80 | 52.9 | 38.8 | 17.6 | 63 | 41.6 | 30.5 | 13.9 | 50 | 33.1 | 24.2 | 11 |
| LS400 | 400 | 355 | 71 | 85.3 | 62.5 | 28.4 | 56 | 67.3 | 49.3 | 22.4 | 45 | 54.1 | 39.6 | 18 |
| LS500 | 500 | 400 | 63 | 133.2 | 97.7 | 44.4 | 50 | 105.8 | 77.6 | 35.3 | 40 | 84.6 | 62.0 | 28.2 |
| LS630 | 630 | 450 | 50 | 188.9 | 138.5 | 63.0 | 40 | 151.1 | 110.8 | 50.4 | 32 | 120.9 | 88.6 | 40.3 |
Selection Conditions
| Material to be processed: _____ | Working environment is indoor or outdoor:________ |
| Handling capacity: ________per hour | Working environment temperature: _______ ℃ |
| Bulk Density: _____t/m3 | Installation form is horizontal or inclined : ________ |
| Conveying distance: ________ | If it is inclined,what is the inclined degree_____° |
| Material size:____mm | Water content:____% |
| Material temperature: _______ ℃ | Working power supply: _____V ______HZ ______PH |
