Basic introduction of instruments and applicable industries
DHS16-A series halogen lamp drying method electronic moisture meter
adopts high performance imported electronic components, combined
with high precision electronic balance sensor, to achieve rapid and
accurate test sample weight loss moisture, instrument data weight
linear high, small deviation. It is widely used in all industries
requiring rapid moisture determination, such as the determination
of pharmaceutical moisture, chemical sample moisture, plastic
moisture, rubber moisture, food moisture, grain moisture, tobacco
moisture, ore moisture, iron and steel moisture, agroforestry
moisture, tea moisture, textile moisture, paper moisture,
fire-proof moisture, coal and other industries in the laboratory
and production process. Sample status: debris, powder Particles,
viscous, liquid, fiber can be tested
Instrument testing principle
Moisture Analyzer is configured on the basis of high-precision
electronic balance weighing sensor and high-efficiency secondary
heat radiation device, to achieve rapid and accurate determination
of the water. Moisture Meter is a thermodynamic theory based on the
material after drying by the weight and wet weight than the
percentage of access to content and gouache other results.
1. Using analytical balance sophisticated sensors to ensure
high-precision weighing.
2. As the use of high-sensitivity sensors, the test only a few
grams of sample with the quality, reduce testing time
3. Use of 400W halogen lamps designed to be of secondary radiation
heating source, the sample temperature reached 160 degrees within 2
minutes.
4. Has three kinds of measurements:
1) Automatic mode: Measuring the process of per-minute rate of
change of moisture content (drying rate) less than the preset
value, the measure will automatically stop, and get measurements.
2) Manual mode: button operation can be terminated by the
determination and get measurements.
5. They are equipped with a standard serial interface,connecting to
printer or computer.
6. They can be calibrated weighing system and temperature system
calibration.
| Model | DHS16-A |
| Max.weight | 100g |
| Weight Readability | 0.001g |
| Readability of Moisture | 0.01% |
| Measuring scope of Moisture | From 0.01% to 100% |
| Repeatability | ±0.2% |
| Display parameter | Moisture %,weight,temperature,time |
| Heating temperature range | Room temperature to 160 ℃ |
| Timer range (increase by 1 minute) | 1 min to 180min |
| Analysis mode | Manual∕Automatic |
| Heating source | 400W Annular halogen lamp |
| Pan size | 100mm |
| Data output interface | RS232C |
| Electric source | 220V,50HZ |
| Net weight | 6.5 Kg |
Outline dimension (W×D×H,mm) | 330×190×180 |
| Packing size(W×D×H,mm) | 440×380×530 |
