Simple Stone Crushing Equipment Concrete Double Toggle Jaw Crusher
PE 600 X 900
Product Descriptions of Jaw Crusher:
Jaw crusher is mainly used for crushing various kinds of ores and
bulk materials. It is widely used in mining, metallurgy, building
materials, highway, railway, water conservancy and chemical
industries. The highest crushing material is 320MPa. In accordance
with the size of the feed inlet to the large, medium and small
type, feed inlet width greater than 600MM for large machines, feed
inlet width of 300-600MM for medium-sized machine, feed inlet width
for small machine. Jaw crusher simple structure, easy to
manufacture, reliable, easy to use and maintenance.
Parameters of Rock Crushing Equipment:
| Model | Inlet Size (mm) | Feed size (mm) | Adjustable Range | Capacity (t/h) | Speed (r/min) | Power (kw) |
| PE-150*250 | 150*250 | 125 | 10-40 | 0.6--3 | 300 | 5.5 |
| PE-250*400 | 250*400 | 210 | 20-60 | 3--13 | 300 | 15 |
| PE-400*600 | 400*600 | 340 | 40-100 | 10--34 | 275 | 30 |
| PE-500*750 | 500*750 | 425 | 50-100 | 20--52 | 275 | 55 |
| PE-600*750 | 600*750 | 500 | 150-200 | 50--100 | 275 | 55 |
| PE-600*900 | 600*900 | 500 | 65-160 | 30--75 | 250 | 55-75 |
Working Principles of Double Toggle Jaw Crusher:
The motor transmits power through belt, drives the moving jaw do
periodic motion to the fixed jaw surround the eccentric shaft. The
angle between toggle plate and moving jaw increases when moving jaw
moves up. So the moving jaw closes to the fixed jaw, and the stuff
will be crushed in multiple ways. The angle of Jaw Crusher between
toggle plate and moving jaw decreases when moving jaw moves down,
the moving jaw of jaw crusher moves away from fixed jaw by the
pulling force of rod and spring, the products after crushing will
be discharged from the outlet of Jaw crusher.
Main Features of Rock Crushing Machine:
1) Simple structure in linear type ,easy in installation and
maintation.
2) Adopting advanced world famous brand components in pneumatic
parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and
closing.
4) Running in a high automatization and intellectualization,no
pollution
5) Apply a linker to connect with the air conveyor ,which can
directly inline with filling machine.
In order to recommend a suitable design for you, please kindly tell
me:
1. What is your raw material to be crushed, is it soft stone (like
limestone, dolomite) or hard stone (like granite, basalt, river
stone, etc)?
2. What is the maximum feed size of your raw material?
3. What are the output sizes you want?
Normally for road construction, it is 0-40 mm, while for aggregate,
it is 0-20 mm.
4. What is the capacity you want? How many tons per hour?
