Great Concentricity Tungsten Carbide Rod Inner Hole Running For
Crossing Nozzle
Carbide rods are mainly used for drills, end mills, and reamer. It
can also be used for cutting, stamping and measuring tools. It is
used in the paper, packaging, printing, and non-ferrous metal
processing industries. In addition, it is also widely used in the
processing of high speed steel tools, carbide milling cutters,
carbide tools, NAS cutting tools, aviation tools, carbide drills,
milling core drills, high speed steel, taper milling cutters,
metric Milling cutters, micro end milling cutters, hinge pilots,
electronic cutters, step drills, metal cutting saws, double
guaranteed diamonds, guns, angle cutters, carbide rotating jaws,
carbide tools, etc.
Normal Description:
YG6X:it is useful for the finish machining of chilledcast
iron,ducttle cast iron,heat-resisting alloy steel,Drawing Design Cemented Carbide Rods With Hole Working For Client’s
Need.
JL05:it is suitable for the finishing machining of chilled cast
iron,ducttle cast iron,heat-resisting alloy steel,nonferrous metal and nonmetal. It can also make for wear part
with high quality requirement. YG10X:good commonality,high hardness and toughness.it is suitable for manufacturering various kinds of intintergral end mills,such as
intergral drill,milling cutter,hote boring cutter,reamer bit and so
on.it is mainly used for the finish machining of various kinds of
cast iron and nonferrous metal.
JL10:good commonality,with high hardness and TRS.it is used forthe
semi-finishing of various steel and nonferrous metal.
JL15:fine particle size product,with good wear resistance and shock
resistance.it is used for the semi-finishing and finishing machining of various metal and nonmetal.
JL20:fine particle size product,with excellent wearresistance and
shock resistance.it is also can be used for machining heat-resisted steel,stainless,nickel base,high
temprature alloy.
Property and feature:
1. High-quality ultra-fine tungsten carbide and imported cobalt
powder are used as raw materials.
2, using the world's advanced low-pressure sintering preparation
technology for standardized production.
3. It has high strength and high hardness.
4, has excellent red hardness, good wear resistance, high elastic
modulus, high bending strength, good chemical stability (acid,
alkali, high temperature oxidation), good impact toughness, low
expansion coefficient, thermal conductivity, electrical
conductivity and Similar characteristics of iron and its alloys.
5, high-tech precision advanced equipment: low-pressure sintering
furnace sintering.
6, a unique new process: vacuum high temperature and high pressure
sintering. The product is pressure sintered in the final stage,
which greatly reduces the porosity, improves the compactness, and
greatly improves the mechanical properties of the product.
Diameter:
type | dimension(mm) |
diameter(mm) |
diameter tolerance(mm) |
length(mm) |
length tolerance(mm) |
| Ф4*L | 4 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф4.5*L | 4.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф5*L | 5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф5.5*L | 5.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф6*L | 6 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф6.5*L | 6.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф7*L | 7 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф7.5*L | 7.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф8*L | 8 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф8.5L | 8.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф9*L | 9 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф9.5*L | 9.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф10*L | 10 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф10.5*L | 10.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф11*L | 11 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф11.5*L | 11.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф12*L | 12 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф12.5*L | 12.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф13*L | 13 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф13.5*L | 13.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф14*L | 14 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф14.5*L | 14.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф15*L | 15 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф15.5*L | 15.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф16*L | 16 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф16.5*L | 16.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф17*L | 17 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф17.5*L | 17.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф18*L | 18 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф18.5*L | 18.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф20*L | 20 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф22*L | 22 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф25*L | 25 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф30*L | 30 | +0.4~0.6 | 10~300 | 0~+3 |
