2W025-08 UD-8 1/4'' UNI-D Type Brass Solenoid Valve Direct Acting
Normally Closed 24VDC 110VAC
This 2W025-08 / UD-08 solenoid valve has a port size that is 1/4”
inch female threaded. The orifice size is 2.5mm and the CV value is
0.23. This valve is not recommended for gravity fed systems because
of the small orifice size. The seal material is NBR, and Viton
Rubber is also available.
The coil head is fitted with a wire lead that can easily be
connected with your own choice of terminals. The top of the coil
features a label that indicates the valve type and specifications.
Its response time is very low; in fact, it acts in less than one
second, making it a great choice for all types of applications.
This model works best mounted in an upright position with the coil
on top. The body features a stamped arrow on the valve body to
indication the direction of flow. The valve body is threaded at the
base and can quickly be mounted with 5mm machine screws.
Our full range of universal brass solenoid valves are available in
various sizes. These valves can be used in both normally open and
normally closed positions. Ideal for a wide range of applications.
Customers commonly use the UD-8 / 2W025-08 Valve for Water Filters,
Ice Makers, Drinking Fountains, Washing Machines, Dishwashers,
Dental Tools, Fish Tanks, Beer Brewing, Hydroponics, HVAC and
Plumbing.
YouTube video of 2W025-08 UD-8 Electric Solenoid Valve Normally
Closed:
Main dimension of 1/4'' 2W025-08 Direct Acting NC Water Solenoid
Valve:
Details of 1/4 Inch UD-8 UNI-D Type Normally Closed Solenoid Water
Valve:
Specifications of 2W, UD & UW Series 2/2 Way Brass Solenoid Valves:
| Ref No | Model No | Pipe Size | CV | Orifice | Fluid Temp. (°C) | Operating Pressure kgf/ cm2 (bar) |
| Water | Air | Light oil |
| UD-6 | 2W025-06 | 1/8'' | 0.23 | 2.5mm | -5°C- +80°C | 0~7 | 0~7 | 0~7 |
| UD-8 | 2W025-08 | 1/4'' | 0.23 | 2.5mm | -5°C- +80°C | 0~7 | 0~7 | 0~7 |
| UD-10 | 2W040-10 | 3/8'' | 0.58 | 4mm | -5°C- +80°C | 0~10 | 0~10 | 0~10 |
| UW-10 | 2W160-10 | 3/8" | 4.5 | 15mm | -5°C- +80°C | 0~5 | 0~7 | 0~5 |
| UW-15 | 2W160-15 | 1/2'' | 4.5 | 15mm | -5°C - +80°C | 0~5 | 0~7 | 0~5 |
| UW-20 | 2W200-20 | 3/4" | 8.6 | 20mm | -5°C- +80°C | 0~5 | 0~7 | 0~5 |
| UW-25 | 2W250-25 | 1" | 12 | 25mm | -5°C- +80°C | 0~5 | 0~7 | 0~5 |
| UW-35 | 2W350-35 | 1-1/4" | 24 | 35mm | -5°C- +80°C | 0~5 | 0~7 | 0~5 |
| UW-40 | 2W400-40 | 1-1/2" | 28 | 40mm | -5°C - +80°C | 0~5 | 0~7 | 0~5 |
| UW-50 | 2W500-50 | 2" | 48 | 50mm | -5°C - +80°C | 0~5 | 0~7 | 0~5 |
Application fields of 2W025-08 / UD-8 Direct Acting Solenoid Valve:
What we can do for you:
Brando has a variety of 2/2 way brass solenoid valves. They have 2
ports (1 inlet and 1 outlet) and 2 electromechanically controlled
switching states (open or closed). They are only used to start /
stop media flow and are usually closed most often (power on), so if
the power fails, the valve will close. They can also be designed as
normally open (power off) or bistable (latch).
There are multiple selection criteria from orifice size, connection
type, voltage, pressure range, operation, design, certification,
sealing materials and housing materials to ensure you have the
valve that is right for your application. Our port sizes range from
1/8 inch to 2 inches and can meet the requirements of most
applications, but for applications beyond this range, we also serve
you. Depending on the wires available in the application, AC or DC
voltage coils can be used.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
