Stepless Amplitude Ultrasonic Welding Machine 20KHz For Electron / Stationery Packing

20KHz Ultrasonic Plastic Welding Machine For Electron / Stationery Packing

Start up the ultrasonic welding machine to automatically search the vibrator and the resonance frequency of the welding head, detect the power supply of the system, the frequency range of the welding head, and check whether the key fails. Confirm the working frequency and store the memory. Finally, judge whether the current of welding head is too high. After confirming that it is normal, release the start key lock of each part automatically, otherwise the equipment cannot start normally.
I. four features of intelligent automatic frequency tracking plastic welding machine:
1. Automatic frequency tracing: the intelligent frequency control system avoids the inconvenience of manual frequency modulation, automatic detection of sound overload, automatic adjustment to the working frequency band, real-time tracking of the working resonance point, more stable operation of the machine, keeping the lowest temperature of the vibration group, and automatic adjustment of the machine when the frequency changes with the rise of the temperature of the welding head.
2. Stepless amplitude: stepless amplitude control, with 5% increase, the size of rubber parts can be welded, effectively reducing the adverse products such as piercing and scalding
3. There are three modes:
A. time mode, precise time control, no time difference, the longest time is 9.999 seconds, up to 1ms increase or decrease (thousandth of a second).
B. depth mode, built-in grating ruler, accuracy up to 0.01mm, setting fusion distance, effectively avoiding the impact of air pressure, voltage instability, high and low errors of rubber parts on the final welding.
C. power mode, when the welding reaches the set power end, the wave will be generated
4. 4.3 inch touch screen display, digital input is simpler and more accurate than the old dial type operation, the counter can input the initial value, convenient for counting and memory. Chinese and English interface operation (optional) to facilitate foreign procurement.
II. Three intelligent protections:
Mold current over protection, frequency offset protection, total output over protection, to protect the machine.
Three, seven reasons for choosing ultrasonic welding machine
1. The fusion precision is higher, and the research and application of depth mode is a new breakthrough in the fusion precision.
2. It is applicable to a wider range of welding heads, wide band design, 20K resonant band equipment from 19.600khz to 20.200khz, recommended working point is 19.900khz, 15K equipment from 14.600khz to 15.200khz, recommended working point is 14.900khz, a total of 600Hz bandwidth is applicable to various manufacturers and new and old welding heads.
3. The operation is simpler. Replace the welding head, restart the power supply after the welding head is fixed firmly, and the equipment will automatically detect and track the frequency points of the new welding head. Abnormal automatic shutdown, reduce the rate of defective products, prevent machine damage.
4. Welding record: it can store more than 300 specific parameters of product welding for viewing the welding effect at any time.
5. Alarm can be set for energy on-line and off-line to reduce the defect rate.
6. Automatic detection of machine fault, making relevant prompt, convenient for maintenance.
7. Double start mode, safer.

20KHz Ultrasonic Plastic Welding Machine For Electron / Stationery Packing

Ours Ultrasonic Co.,Ltd

Ours Ultrasonic Co.,Ltd was established in 2009 .Registered capital of 3 million.Our Plant located at Shenzhen ,China More than 2,000 square meters . The company employs 100-150 people, including 10 technicians and 15 international and domestic sellers. Ultrasonic digital generator and PCBs . monthly production is 1000-3000 units, and ultrasonic cleaning and welding transducer 200,000pcs,ultrasonic immersible pack about monthly 20,000 sets.

At OURS ULTRASONIC ,We specially made an easy high power ultrasonic way ,We are manufacturer of Ultrasonic generator for cleaning and welding ,Ultrasonic transducer for cleaning,welding and powder vibration . Ultrasonic immersible transducer pack and cleaning machine ,Piezoelectric ceramic &ultrasonic equipment.

Our vision:High power ultrasonic is our main service purpose,the products what we offered are the best quality with best price,also excellent sale service for you always.

Meet in OURS ULTRASONIC:We are committed to the transmission of industrial ultrasonic to all parts of the world.OURS Ultrasound products all over the world.

Working at OURS ULTRASONIC:Professional ultrasonic technology service.Provide the best pre-sale ,Sales service,and after sales service.

Living in OURS ULTRASONIC:We are committed to expanding ultrasound products.Making OURS Ultrasonic Products being an important Part of Everyday Life.

We exported to Europe,America,Asia, Oceania,even Africa. such as Italy, Slovakia,Netherlands,France,Germany, Russia，Croatia, Slovenia, Switzerland, Portugal,USA, Canada,Mexico,Brazil, Ireland, Philippines,India,Malaysia, Indonesia,South Africa,etc.

We Trust that Ours Ultrasonic company will be come true the world wide brand name in near future and your support is most importance and positive for us,Let’s go for Ultrasonic Industry!