Customized Size Turbine Cylinder Cooling Device High Heat Transfer Effect

High heat transfer effect rapid cooling device custom size for different turbine

Product description

The quick cooling device has a manual stop valve, a pressure switch, a flow meter, an electric regulating valve, an electromagnetic valve, an oil-water filter, a compressed air electric heater, a pipeline, a gas collecting box, a pressure gauge, a safety valve, a temperature measuring element, a control cabinet, and the like.



Product Features
The equipment adopts two high-efficiency deoiling filters, which are separated by centrifugation, followed by stainless steel wire mesh, and then through filters with special ultra-fine fibers as the main body.

It is a new type of air purification device which is based on aerosol mechanics and condensed filtration mechanism to remove dust from compressed air. Oil mist The filtration efficiency of wet purification is less than 99%. Gu Ke desiccated the steam turbine when it was fast cooling. Clean air quality,characteristics of electric heaters;Compressed air electric heaters are made up of multiple heating tubes. Cylinder body Spiral diversion baffle and so on.

The heater core takes the form of spiral diversion, and compressed air enters the heater interior for heating. The heater core is heated by rotating flow around the heater core, and each heating part of the heater element can be effectively utilized. The heat transfer effect of the heat pipe is effective.
The heating wire, magnesia powder and other materials of electric heater are made of high quality materials from selected import, which enhance the service life of heating pipe.






Specifications

cylinder cooling preparation before commissioning

rapid cooling equipment debugging personnel clear division of labor, on-site control of one person, valve opening two, centralized control room to monitor one person, to maintain smooth communication, timely follow the commander's orders.
the operator of the control cabinet shall be responsible for all the functions of the screen, buttons, switches, system settings, etc., to be understood, proficient, and skilled in the operation of the professional personnel, (see the control panel diagram for more details)
the unit is ready to use the quick cooling device after shutdown, the sliding parameter should be used as far as possible, and the temperature after shutdown should be reduced as much as possible. The first stage metal temperature of the high pressure cylinder and the inlet blade ring temperature of the middle pressure cylinder drop below 400 ℃.
before forced ventilation and cooling, steam turbine high, medium pressure cylinder should be fully drained and completely isolated. Because the drainage discharge is not enough or the system is not strictly isolated, the cold steam and cold water enter into high, the local temperature difference in the middle pressure cylinder is too large, and the temperature drop rate is too large.

Jiangsu Gaoyi Electric Technology Co., Ltd. has been continuously developing and growing with the support and care of friends from all walks of life. The company has more than 183 employees, of which 18% are professional and technical personnel. The company covers an area of over 60,000 square meters, with a construction area of over 20,000 square meters. The company has advanced complete sets of production equipment for numerical control, cutting, folding, punching, coiling, welding, etc. The annual production capacity can reach 50 million.

Our company is a company specializing in designing and producing pneumatic conveying and electric dedusting and electric dedusting products for thermal power plants and environmental protection industries. It has successively developed pneumatic conveying engineering equipment and bulk machines, mixers and air gasification for ash storage. Tanks, gasification door devices and other products. Non-standard equipment for power station auxiliary equipment and various types of unit spare parts; various types of electric heating control systems; DYK air electric heaters; DYB plate electric heaters; DYB (B) thermal insulation electric heaters; JZ track electric heaters And other products.

The company pays special attention to attracting talents and scientific and technological development.It has signed long-term technical cooperation agreements with scientific research units such as Southeast University and Shanghai East China Design Institute.It has successively developed pneumatic conveying engineering equipment and bulk machines, mixers and air gasification for ash storage. Tanks, gasification door devices and other products.

The company always takes the leading of product technology, first-class products, complete testing and testing equipment, fast and thoughtful after-sales service as its corporate purpose, and passed the ISO9001-2000 quality assurance system certification.

Quality product performance and good reputation, our products are not only successful sales in China, and have been exported to more than 120 countries and regions in the world, including: Germany, Japan, Italy, Russia, Japan, South Korea, Turkey, Brazil , India, the United Arab Emirates, Saudi Arabia and other countries, the products are subject to a great welcome and praise.