FBS Series 0.75kw High Pressure Swimming Pool Water Pump With
Filter Basket Kit
Paramerter:
| Model | Voltage | HZ | Power(KW) | Power(HP) | Hmax(m) | Qmax(m³/h) | Port Size(inch/mm) | |
| FBS-100 | 220V-380V | 50/60 | 0.75 | 1 | 7 | 16.5 | 50 1.5” | |
| FBS-150 | 220V-380V | 50/60 | 1.1 | 1.5 | 8.5 | 18.5 | 50 1.5” | |
| FBS-200 | 220V-380V | 50/60 | 1.5 | 2 | 10 | 21 | 50 1.5” | |
| FBS-300 | 220V-380V | 50/60 | 2.2 | 3 | 13 | 25 | 50 1.5” | |
Features:
Single or three phase, Class F, IPX5.
Silent operation, Concise design.
Liquid temperature less than 60 degree.
Can resist chemical in swimming pool.
Nice performance, Overload protection.
Nichel plated antirust spindle or stainless steel 304 weld spindle.
Huge pro-filter for less cleaning maintenance.
Heighteen pump base to keep water pump off the moist working
environment.
Arrange drain device of water pump.
- [POWERFUL MOTOR] ~ Heavy-duty high performance motor with airflow
ventilation for quieter, cooler operation. Self priming suction
lift up to 8 feet above water level.
- [EXCELLENT FILTER PERFORMANCE] ~ 110-Cubic-inch basket for extra
leaf-holding capacity extends time between cleanings. Rigid
construction with load-extender ribbing assures free flowing
operation for heavy debris loads.
- [EASY OPERATION] ~ See-thru strainer cover lets you see when basket
needs cleaning. Exclusive swing-aside handle makes strainer cover
removal easy.
USAGE:
- Swimming pool.
- Outdoor/indoor spa.
- Water transfer.
- Well/River pumping.
- Domestic water supply.
- Gargen or agricultural irrigation.
- General industrial service.
Quality Assurance
1. Product qualifaction rate box 100%.
2. 1 years factory warranty period.
3. Less than 2‰ defective rate.
4. 24hrs after-sales service.
USE AND MAINTENANCE:
1. You should make the pump working in the standard rotate speed in
use process, don't speed up at will, in order to avoid potential
safety hazard and impact the useful life of the pump.
2. Direct coupled type pump units:the chassis must remain stable,
so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the
belt loose or tighten must be moderate. If the pump doesn't turn,
it is generally because the impeller-ring get rusty, you can use
the mallet knocking the coupling axially.Pump mounting height(in
order to suction the water tank as the base)should be less than the
permit smoking on 1-2meter high vacuum.
3. You should stop the engine if you discover abnormalities(such as
noise, shock, hydraulic discharge descend etc.),and attention the
bearing heat up, the temperature can't exceed 75°C.
If stop using for a long time, you should discharge the water in
the pump, overhaul and oil, keep it in a dry and ventilate shade.
In winter, you should discharge the water at once when you stop
using it in case frost crack.After the pump every 1000 hours
operating time, you should take down and clean the bearing, and
exchange quick-wear parts.
