Hot Dipped Galvanized Plate Grip Strut Grating Walkway Anti-Rust
Grip Strut Safety Grating plank is an excellent slip resistant material that is low in material
cost, as well as installation cost. This planking, at 2" deep x 14
gauge and 4-3/4" wide (2 diamond), provides maintenance-free open
design for drainage of fluids, chips, grease, mud and snow. The
serrated surface grips soles securely-in all directions-in
practically every place. High strength-to-weight performance is
achieved through depth of section and structural design. Light and
easy to handle, this helps in quick installation, that usually can
be handled by one person. Available in pre-galvanized and hot
rolled pickled and oiled (HRPO). Standard lengths are 10' and 12',
with the ability to run up to 24' on certain sizes. Please check
with your P&R representative for more information.
All Guorun safety gratings are also available as flat blanks
without folded edges.
In that case, the maximum embossed field width must not be greater
than 750 mm for diamond forms.
For manufacturing reasons, these flat cuts have a slightly curved
finish.
Gratings with other dimensions (H/W/L) than those mentioned above
can also be produced.
Gratings with unperforated edges or surfaces on one or both front
surfaces are also available.
We can also be supplied with ø 5-mm drain holes.
Please contact us for further technical questions.
Materials of grip strut plank grating, stairs trends grating
- Pre-Galvanized Steel (ASTM A-924-G90): 12 Gauge or 14 Gauge.
- Hot Rolled Steel: 12 Gauge or 14 Gauge.
- Aluminum Alloy 5052H32: 0.080" Thick or .100" Thick .
- Stainless Steel Type 304 or Type 316: 16 Gauge.
| 2 Diamond / 9-1/4" Width |
| Diamond Pattern | Width | Channel Depth | galvanized | Aluminum |
| 2 Diamonds | 9-1/4" | 2" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 9-1/4" | 2-1/2" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 9-1/4" | 3" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 9-1/4" | 4" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 3 Diamond / 13-3/4" Width |
| Diamond Pattern | Width | Channel Depth | galvanized | Aluminum |
| 3 Diamonds | 13-3/4" | 2" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 13-3/4" | 2-1/2" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 13-3/4" | 3" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 13-3/4" | 4" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 5 Diamond / 23-1/4" Width |
| Diamond Pattern | Width | Channel Depth | galvanized | Aluminum |
| 5 Diamonds | 23-1/4" | 2" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 23-1/4" | 2-1/2" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 23-1/4" | 3" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 23-1/4" | 4" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 6 Diamond / 27-3/4" Width |
| Diamond Pattern | Width | Channel Depth | galvanized | Aluminum |
| 6 Diamonds | 27-3/4" | 2" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 27-3/4" | 2-1/2" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 27-3/4" | 3" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 27-3/4" | 4" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 8 Diamond / 36" Width |
| Diamond Pattern | Width | Channel Depth | galvanized | Aluminum |
| 8 Diamonds | 36" | 1-1/2" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 36" | 2" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 36" | 2-1/2" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
| 36" | 3" | 11 Ga., 10 Ga., 9Ga. | 12 Ga. (.080"), 10 Ga. (.100") |
Applications of Grip Strut Plank
Grip Strut Plank can be made out of iron plate, aluminium plate or
stainless steel plate, etc, based upon different working
environments. If iron plate is used, when grip strut plank is
ready, it can be electro-galvanized, hot dip galvanized or
spray-painted. Grip strut plank has nicer skid resistance and
beautiful look, so it is widely used as stair tread, walkway and
workshop floor in factories and transportation facilities, etc.
When grip strut plank is covered with mud, ice, snow, grease, oily
soil or cleaning media, grip strut plank can efficiently safeguard
the safety of operating personnel.
Characteristics of the perforated Grtp Strut Grating:
With non-slip, anti-rust, anti-corrosion, durable features and
beautiful appearance. Punching hole type with raised herring
bone, raised crosswise, round, crocodilelips type, tear-type. These
hole types are all CNC punching holes.
Advantages of grip strut grating
Economical to install In addition to low material cost and nominal
erection cost, Grip Strut safety grating also helps save with its
long-lasting, rust-resisting materials and finishes.
• Standard mill-galvanized finish resists corrosion to help provide
lasting surfaces.
• High-strength aluminum and Types 304 and 316L stainless steel
help provide maximum corrosion resistance.
• Black unpainted steel available for installations requiring hot
dipped galvanized finish after fabrication.
• These light weight yet brawny panels permit substantial reduction
in structural steel requirements.
Feature advance:
1, low cost, zinc plate is cheaper compare to after hot dipped
galvanized
2, easy install, but need think about carrying capacity
3, anti-skid effect is best, there are 14 teeth around one hole,
getting hold of the shoes sole when you stand in walkway.
4, low maintain cost.
