Net Drainage Mat Extrusion Production Machine Plastic PP Spinneret
Protective
Features and benifits
- Drainage of excess moisture and ventilation in one product
- Lightweight and easy to handle
- Simple installation with mechanical staple hammer
- Polymer core resistant to most known corrosive chemicals, including
solvents
- Wide rolls for fewer seams
- Core ABSORBS and RELEASES NO MOISTURE
- Provides no source for the promotion of MOLD, MILDEW or BACTERIA
WaterWay Rainscreen Drainage Mats consist of a Nylon / Polymer core of fused, entangled filaments in
varying thicknesses from a nominal 1/4 inch to 3/4 inch, depending
on desired cavity space and cladding selection. Certain profiles
are available with a protective Moisture Resistive Filter Fabric bonded to one side or two side - a revolutionary "Patent Pending" Drainage Mat incorporating a .45" / 11mm thick polymer matrix heat
laminated to a breathable filter fabric on one side and weather
resistive barrier (WRB) on the other side. This multiple layer
product creates a one step WRB and Rainscreen drainage assembly in
a single application. WaterWay Rainscreen Mats are designed for Stucco, EIFS, Manufactured & Natural Stone,
Fiber-Cement, Brick, Lap and Cedar Sidings and other Wall Cladding
Systems.
Three Unique Profiles Accommodate Cladding Selection & Space
Requirements
WaterWay Plus is a revolutionary Patent Pending Vertical Wall Rainscreen Drainage
Mat consisting of a nominal 7/16 inch / 11mm thick extruded polymer matrix of tangled monofilaments.
PP three-dimensional net (protective net) is a three-dimensional
network structure made of polymer synthetic material. It is loose
and flexible, leaving 90% of space to fill soil and sand. The roots
of plants can grow evenly through it. The turf after growth makes
the mat, turf and soil surface firmly combined. Since the plant
roots can extend 30-1250px below the surface, a solid green
composite protective layer is formed. When combined with a
non-woven fabric, it provides an uninterrupted drainage and
ventilation path for moisture between the exterior finishing
material and the siding.
1. The project cost can be greatly reduced. The cost is 1/7 of the
concrete slope protection and dry stone protection slope, and 1/8
of the slurry block stone protection slope.
2, the use of polymer materials and anti-UV stabilizers, its
chemical stability is high, no pollution to the environment
(degradable network mats in the soil after two years without
leaving traces).
3. The construction is simple, and the surface can be leveled
before construction.
Plastic PP (PE) three-dimensional net, drainage net product use:
Before the turf grows, it can keep the surface of the soil from the
wind and rain.
The composite protective layer formed with the plant can withstand
high water level, high flow rate water flow erosion.
It can replace slope materials such as concrete, asphalt and block
stones, and is mainly used for slope protection of roads, railways,
rivers, dams and hillsides.
Widely used in landfill drainage, highway subgrade and pavement
drainage, railway drainage, tunnel drainage, underground structure
drainage, retaining wall back drainage, garden.
| Model | ZP-1500 | ZP2000 | ZP2500 |
| Width of product(mm) | 1000 | 1500 | 2000 |
| Extruder | SJ90/30 | SJ120/30 | SJ150/30 |
| T-die(mm) | 1500 | 2000 | 2500 |
| Water tank | 1500 | 2000 | 2500 |
| Dewater | 1500 | 2000 | 2500 |
| Transission frame | 1500 | 2000 | 2500 |
| Cooling water | 20 | 30 | 50 |
| Compressor(Mpa) | 0.6 | 0.6 | 0.6 |
| Total power(Kw) | 150 | 200 | 250 |
| Equipment size(m) | 22*2.5*4.5 | 22*3.0*4.5 | 22*3.5*4.5 |
| Voltage | According to customer's factory | According to customer's factory | According to customer's factory |
