Small Volume Capsule Filling Machine
Product description of Capsule Filling Machine
It adopts hole plug type filling, batch-type running and frequency
control. It is suitable for the whole capsule filling process:
capsule feeding, separating, filling(waste capsule
rejecting),closing, perfect capsule outputting, for powder and
micro pill capsule.
Latest structure: The closed ten position rotating table, high
precision, low noise and best suitable for domestic machine-made
capsule, and soon the key parts of the bearing and electrical
equipment adopts international famous brand, performance stability
and can be run at a high speed.
Main Parameter of Capsule Filling Machine
| Model | SED-400J-A |
| Output(pcs/min) | 400 |
| NO of Filling hole | 3 |
| Capsule filling hole | 00#-4# |
| Total Power | 3kw |
| Weight(kg) | 350kg |
| Dimension(mm) | 700×570×1650mm |
Trait of Capsule Filling Machine
1.Good-looking appearance, exquisite workmanship, ease of
operation, simplicity of use.
2.Stowage seat and measuring plate are designed as one unit to make
measuring plate and stowage rod without deviation, Phenomenon avoid
friction Phenomenon between stowage rod and measuring plate,
improve its precision highly, furthermore, it prolongs the
machine's life greatly.
3.Ineligible capsule can be eliminated automatically(qualified rate
not included), the medicine in the capsule can be recycled and be
reused thus it can increase greatly heconimic efficiency.
4.Simplicity and convenience of dismantling, installation and
clean, various models of mould can be replaced each other, the
mould of 80 model and 1000model as well as 1200 model can be
replace mutually on the same machine to meet different requirement
of capacity.
5.Dust collector and vacuum pipe as well as waste air Pipe are
installed in the inner of the machine to avoid the air pipe
becoming hard, bard broken and leakage etc phenomenon, it is mo re
convenient to clean the platform. Furthermore, it accords with the
requirement of GMP that medicine can not contact with organic
material.
6.The cap of stowage rod is made of stainless steel which replaces
original plastic cap to void breaking Phenomenon; the screws and
caps on the platform lesser to make the whole appearance more
good-looking.
Application of Capsule Filling Machine
