CZ Purlin Machine Roll Forming Machine for Construction Material
c z purlin roll forming machine has now become an indispensable equipment for construction of
I-beam and channel steel in tunnels, subway, hydropower stations,
underground caverns, etc
c z purlin roll forming machine features:
1.Upgraded version of CZ integrator, fast transformation; 1-2
minutes transformation of 2.specifications and CZ
3.Realization of Automatic Conversion of CZ Specification
4.Realize CZ automatic flip 180 degrees
c z purlin roll forming machine technical parameters:
1. Spindle material: 45# steel quenching and tempering treatment,
outer diameter Φ80mm
2, roll material:
1) Cr12 chrome steel quenching treatment HRC60-62 ° (optional)
2) GCR15 bearing steel quenching treatment HRC58-60°
3, the number of leveling rolls: 5 roll leveling
4, the number of main rolls: 15 rows (3 rows of leveling 12 rows of
molding)
5, the main motor power: 11KW
6, rolling speed: 8-12 m / min
7. Cutting system: It adopts advanced hydraulic drive and
automatically cuts the length after forming. Invariable, no waste,
high safety factor. (The host stops cutting)
8. Punching: hole type drawing, can be adjusted freely before and
after any setting
9, blade, punch material: Cr12, quenching treatment 60-62 °
10, electronic control system: the whole machine uses PLC, inverter
control, rotation straightening
11, the size of the host: about 10.5M × 1.7M wide × 1.2M high
c z interchangeable purlin roll forming machine charging:
1) Manual discharge rack, inner tension type, loading inner
diameter 450mm--600mm, width ≤600mm, maximum loading weight 4000KG
2) Automatic inner tensioning and discharging rack width ≤600mm,
Width <= 600mm, maximum loading weight: 7000KG
Hydraulic power: 3KW
Cylinder diameter: 120mm, working pressure: 10Mpa
Technical Parameters:
COMPONENT of z purlin forming machine |
| | |
| | |
| Feeding device | | |
Roll forming system | | |
Cutting device | | |
Hydraulic system | | |
| | |
| | |
Welcome to send us your profile drawing.
Machine parameters:
Processing flow of machine:
Decoiler→ Feeding →Roll forming →Measure length →Hydraulic cutting
→Exit table
Details abt the z panel machine:
1. Pre-cutting :
Cutting type: hydraulic, connect with the punching hydraulic unit
Cutting power by hydraulic, 5.5KW AC motor
Hydraulic working pressure: 12-16Mpa
Feeding of the last cut profile from the equipment: automatic if
the length of the last profile is not less than 1500 mm
Cutting motion: The roll forming part is NON-stop when cutting
Material of blade:Cr12 with heat treatment
Length measuring: Automatic encoder length measuring, brand: Omron
Tolerance of length: +/- 1.5mm each piece end product
2. Forming section:
Thickness range: 1.5-3.0mm
Maximum production speed: not less than 10 meters per minute (for
non-perforated profiles, excluding cutting)
Main motor power:4kw, AC motor, motor inside of main machine
Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Roll station: 20 stations
Roller material:ASTM52100 chrome plated surface with hardness 58-62
degree ,CNC,
Shaft diameter: 76mm material: SAE1045 with quenching and tempering
Transmission: by gear box for each station
Advantage:
- In order to keep the product shape and precision, cast iron
structure, motor reducer drive, chain transmission, roller surfaces
polishing, hard plating, heat treatment.
- The polished surface and the heat treatment towards the molds
also can keep the molding plate surface smooth and not easy to be
marked when it is being stamped.
FAQ:
1. Does one machine can only produce one size?
Not exactly, it depends on which profile the customer want to
produce.
2. Do you have after-sales technical support?
Yes,we are happy to give advice and also have skilled technicians
available to maintain the machine overseas to customers’ workshop
if needed.
3. You are trading company or factory?
We are Manufacturer, and we export our machine by ourselves.
4. How long the machine could be made?
Normally speaking, high precision roll forming machine could be
made out with 40 working days.If you need machines in hurry, we can
make it for you less than a month.
5. Do you provide customized?
Sure, we can design the machine according to the requirement and
profile drawing you provide. Our engineers can offer the best
professional solution to our worldwide clients.
6. May we visit your factory?
Sure,Warmly welcome to our factory at any time.
7. How to visit your factory?
By high speed train from Shanghai to East Wuxi (Wuxi Dong station),
half an hour.
8. What's the warranty period?
12 months warranty period, starting from the date of the successful
installation and commissioning of the equipments at the Buyer’s
Installation site.
9. Can you arrange shipment?
Yes, sure, we can arrange shipment for our customers and provide
door-to-door service.
