Non Toxic Phthalate Free Plasticizers For PVC High Chemical
Stability
Features:
1. Eco-friendly and non-toxic: It passed SGS testing, can meet the
environmental requirements of the EU.
2. High flash point: It is not easy to volatilize and will not
occur flash explosion at foaming equipment with high flash point.
3. Color: It is yellowish or colorless, will not affect the
transparent PVC products.
4. Epoxy value: The higher epoxy value, the higher plasticizing
effect. It can increase replacement percentage, to reduce the
production cost of PVC products.
5. No odor: is odorless during our years of research and
development,it can improve the PVC products quality .
6. It makes the PVC products brighter and softer.
7. It has low volatility, good compatibility, good stability to
light and heat, can reduce the amount of stabilizer.
8. Plasticizing efficiency is higher than DOP, it can reduce the
total amount of plasticizer.
Specification:
| Items | Standard |
| Appearance | Colorless transparent liquid |
| Color (APHA) | ≤30 | ≤50 | ≤100 |
| Ester | ≤99.5% | ≤99.0% | ≤98.5% |
| Water | ≤0.03% | ≤0.05% | ≤0.10% |
| Flash point | ≥210℃ | ≥210℃ | ≥205℃ |
| Acid value mgKOH/g | ≤0.02 | ≤0.03 | ≤0.04 |
| Density(20℃) g/cm3 | 0.981-0.984 |
| Volume resistivity Ω.m | ≥2×1010 | ≥1×1010 | ≥0.5×101 |
Storage:
Handling: Provide adequate ventilation and keep away from spark,
excessive heat and ignition source. Storage: Keep container tightly
closed in a dry and well-ventilated place.
The storage temperature should be lower than 45°C, the viscosity
will be increased significantly when the temperature fall below
15°C, if the temperature lower than 5°C, it would become creamy
solid and can recovered to normal appearance while the temperature
is restored to 25-40°C.
Quality standard
The product meets GB/T 5761-2006 standard with its physical and
chemical properties meeting requirement in table below:
1. The user can choose any one from vifscosity number, K value
,index of average polymerizapion degree.
2. The user can confer with the manufacture if they have other
index ,requirement ,on thermal stability.
