light yellow oil biological ester PVC plasticizer which can replace
DOP and environment friendly
Description:
DOP is colorless transparent liquid,water-insoluble, soluble in
most organic solvent and hydrocarbon.It has favorable compatibility
with most industrial resin and partial compatibility with cellulose
acetate and polyvinyl acetate.
DOP OIL Application:
Dioctyl Phthalate/ DOP products is the most popular plasticizer,It
can be used in the processing of various kinds of soft PVC
products, vinyl chloride copolymer andthe resin of the fiber, such
as film,sheet plate, artificial leather, cable, molded plastic and
so on. It also has a good softening effect in a variety of
synthetic rubber.
Specification:
| TYPICAL PHYSICAL-CHEMICAL PROPERTIES |
| Appearace | Transparent light yellow oily liquid |
| Chroma(Pt-Co)# | ≤40 |
| Acid value mgKOH/g | ≤0.3 |
| Heat Loss(125 oC,2 h), % | ≤0.5 |
| Density,(20°C, g/cm3) | 1.08-1.11 |
| K Viscosity(cst,40 oC) | ≤50 |
| Flash Point, oC | ≥190 |
Storage:
Handling: Provide adequate ventilation and keep away from spark,
excessive heat and ignition source. Storage: Keep container tightly
closed in a dry and well-ventilated place.
The storage temperature should be lower than 45°C, the viscosity
will be increased significantly when the temperature fall below
15°C, if the temperature lower than 5°C, it would become creamy
solid and can recovered to normal appearance while the temperature
is restored to 25-40°C.
Quality standard
The product meets GB/T 5761-2006 standard with its physical and
chemical properties meeting requirement in table below:
1. The user can choose any one from vifscosity number, K value
,index of average polymerizapion degree.
2. The user can confer with the manufacture if they have other
index ,requirement ,on thermal stability.
