YL10.2 Extrsuion Sintered Tungsten Carbide Rod with single hole
0.3mm
Specification
| Material: | 100% virgin tungsten carbide raw material |
| Dimension: | OD3*ID0.15*330mm various size for choose |
| Blank Tolerance: | OD:+-0.3mm ID:+-0.05mm |
| Grade: | YL10.2 |
| Type: | carbide hollow round rod |
| Surface: | blank or grinding |
Production Process: | Power mixing-Pressing-HIP sintering-Blank- Processing- Finished |
Performance | High hardness, wear /corrosion resistancce, good toughness, good
straightness |
| Application: | production various types electrical machine & electronic
progressive dies and punches.And ceramics, printing machine,
plastic, rubber, leather industry and cutting machines. |
| Non-standard or tolerance | can be customized |
Tungsten carbide rod with single hole is tungsten carbide round
rod, which has one radial holes.These rods are mainly used for
manufacturing mills, drills, drill bits and other tools, but we
also use them for processing cold heading die, stamping die, cold
punching ball, warheads, watch parts for stamping, punching battery
shell, toothpaste tubes and other molds.
But we cannot omit the fact that tungsten carbide rod with single
hole if used for making knife or parts of mold, they are clamped in
circular shaft, which is not conducive to the cutter and mold
clamping. Of course, we are able to provide quality Tungsten
Carbide Single Hole Rods
Our common size models:
Size range(ODXIDXL mm) | Detail size and blank tolerance |
OD( mm) | ID (mm) | L(mm) |
ODxIDx330 | 2-3(0/+0.3) | 0.15/0.2/0.25/0.3/......1.1(+-0.05) | 30-340 |
ODxIDx330 | 4-6(0/+0.4) | 0.2/0.25/0.3/0.4..........4(+-0.05) | 30-340 |
| ODxIDx330 | 7-10(0/+0.5) | 0.2/0.25/0.3/0.4...........6(+-0.05) | 30-340 |
| ODxIDx330 | 11-20(0/+0.5) | 0.2/0.25/0.3/0.4........12(+-0.05) | 30-600 |
| ODxIDx330 | 22 | 6/8/10/12(+-0.2) | 100-600 |
| ODxIDx330 | 25 | 6/8/10/12(+-0.2) | 100-600 |
| We are able to help you customized various diameter and length
carbide rod |
Material Physical Properties:
1) Hardness greater than or equal to HRA 92.5；
2) TRS greater than or equal to 3800 N/mm²；
3) Density greater than or equal to 14.2 g/cm³;
4) Porosity = A00 / B00 / C00；
5) No contamination by other materials；
6) Free of ETA phase condition；
7) Uniform and consistent grain size. No grain size can be larger
than specified.
Some grade information for reference
| Grade | Density g/cm3 | Hardness HRA(hv) | T.R.S (M Pa) | Performances &applications recommended |
| YL10.2 | 14.5 | 92.5 | 3800 | Wear resistance and strength comparatively higher,suitable for
processing cast iron, non-ferrous metal and non-metalloid
materials. |
| YG6 | 14.9 | 89.5 | 2150 | Good Wear resistance, used for hard wood,processing original
wood,aluminum section bar,brass rod and cast iron. |
| YG8 | 14.6 | 89 | 2320 | Suitable for the roughening of cast iron and light alloys and also
for the milling of cast iron and low-alloy steel. |
| YG11 | 14.4 | 87.5 | 2260 | Medium grain, for wear parts and mining tools |
| YG15 | 14.1 | 86.5 | 2400 | Medium grain, for mining tools, cold heading and punching dies |
| YS2T | 14.45 | 92.5 | 2800 | Fine carbide,high wear resistance,high bending strength,high
resistance to bonding, high thermal strength.Machining of
refractory alloys, stainless steel and high manganese steel
etc.Mainly used for disc cutter and other tools |
| YNi8 | 14.6 | 88.5 | 1710 | This grade with 8% nickel binder, it has good wear resistance&
corrosion resistance performance ,especially used for high pressure
environmental , also good for cutting the titanium alloy. |
Other tugnsten carbide grade information for reference
| YS series grades |
| Grade | ISO range | Density g/cm3 | Hardness HRA(hv) | T.R.S (M Pa) | Performances &applications recommended |
| YS2T | K30 | 14.40-14.60 | 91.5 | 2200 | It is belong with ultrafine grain alloy , suitable for low-speed
roughturning, milling, heat-resistant alloy and titanium alloy for
the cutters and tap, saw blade milling cutter is best . |
| YS8 | M05,K10 | 13.9 | 92.5 | 1720 | Suitable for high, stainless steel, high manganese steel and high
temperature alloy, silicon steel sheet, and cutting all kinds of
coating materials, also suitable for high hardness cast iron and glass and so on work pieces of rough machining, finish machining. |
| YS10 | M05,K10 | 14.30-14.50 | 91.5 | 2650 | Suitable for high nickel iron, ball mill infinite chilled cast iron
and white iron rough and finish machining, also used in rough
machining and finish machining of cast iron. |
| YS25 | P20,P40 | 12.80-13.20 | 91.0 | 2000 | Suitable for carbon steel, cast steel, high manganese steel, high
strength steel and alloy steel rough turning, milling and planing. |
| YS30 | P25,P30 | 12.45 | 91 | 1800 | Alloy ultra fine particles, suitable for large feeding high
efficiency milling all kinds of steel, especially the alloy steel
milling. |
YS5 | | 13.95-14.25 | 92 | 2000 | It is belong ultra fine grain alloy, suitable for high speed car,
milling, heat-resistant alloy and titanium alloy for the cutters
and tap, saw blade milling cutter is best |
| Cutting steel class grade |
| YT5 | P30 | 11.50-13.20 | 90.0 | 1750 | Suitable for heavy duty cutting of steel and cast steel and for a
low-speed and medium-speed and a big feed-rate roughing operation
under unfavorable machining conditions |
| YT14 | P20 | 11.20-11.80 | 91.0 | 1550 | Suitable for semi-finishing and finishing machining of steel and
cast steel, using a medium feed-rate |
| YT15 | P10 | 11.10-11.60 | 91.5 | 1500 | Suitable for semi-finishing and finishing machining of steel and
cast steel and a medium feed-rate and a rather high cutting speed
is to be recommended |
| YC40 | P40 | 13.00-13.40 | 89.5 | 1860 | Suitable for heavy duty cutting of steel and cast steel with a
possible big feed-rate and for face milling as well. |
| YW1 | M10 | 12.85-13.40 | 92.0 | 1380 | Suitable for semi-finishing and finishing of stainless and ordinary
alloyed steel |
| YW2 | M20 | 12.65-13.35 | 91.0 | 1680 | Suitable for semi-finishing and finishing of stainless and low
alloyed steel, mainly used for machining of trains' wheel hubs |
| YW3 | M10 | 12.85-13.10 | 92.0 | 1420 | It is suitable for semi-finishing and finishing of stainless and
ordinary alloyed steel |
Our factory advantage of tungsten carbide rod with single hole
1. Focusing on manufacturing tungsten carbide products over 13 years.
2.Specialist manufacturer equipped with advanced processing machines
3.Over 15 tons/month productivity to assure sustainable supply of products
4. Full ability to accept OEM & ODM orders
5.Stringent quality control and quality consistency.
6. Strict inspection for quality of raw material and finished products
