Cutting Tool Blanks Tungsten Carbide Round Bar With No Stick
Cutting
We manufactured and stocked a large range of dimensions unground
and ground carbide rods for you, which guarantee our fast delivery.
We have a large range of grade for your choice.
We also can develop grade based on your application with
fine&sub micron grain size .
We make tungsten carbide rods extruded or pressed.
Specification
| Material: | tungsten carbide WC+Co/Ni |
| Dimension: | Dia10*75/100/150mm Dia2.0*330mm various size for choose |
| Ground Tolerance: | h6 based on requirement |
| Blank tolerancce: | +0.3~1.5mm |
| Grade: | K20 K30 K10, YL10.2, YG20 YG10X |
| Production Process: | Power mixing-Pressing-HIP sintering-Blank- Processing- Finished |
| Type: | polished round rod |
| Surface: | blank or grinding |
| Performance | High hardness, wear /corrosion resistancce, good toughness, good
straightness |
| Non-standard or tolerance | can be customized |
Our standard size models:
| Grinding | Blank |
| D | L | D | L |
| (mm) | Tol.(mm) | Tol.(+1mm) | (mm) | Tol.(mm) | Tol.(+3mm) |
| 2 | h6 | 330 | 2.2 | +0.2 | 330 |
| 3 | h6 | 330 | 2.7 | +0.2 | 330 |
| 3.175 | h6 | 330 | 3.2 | +0.2 | 330 |
| 4 | h6 | 330 | 3.7 | +0.2 | 330 |
| 5 | h6 | 330 | 4.2 | +0.2 | 330 |
| 6.35 | h6 | 330 | 4.7 | +0.2 | 330 |
| 7 | h6 | 330 | 5.2 | +0.2 | 330 |
| 8 | h6 | 330 | 5.7 | +0.2 | 330 |
| 9 | h6 | 330 | 6.2 | +0.2 | 330 |
| 10 | h6 | 330 | 6.7 | +0.2 | 330 |
| 11 | h6 | 330 | 7.2 | +0.2 | 330 |
| 12.7 | h6 | 330 | 8.2 | +0.3 | 330 |
| 13 | h6 | 330 | 8.7 | +0.3 | 330 |
| 14 | h6 | 330 | 9.2 | +0.3 | 330 |
| 15 | h6 | 330 | 9.7 | +0.3 | 330 |
| 16 | h6 | 330 | 10.2 | +0.3 | 330 |
| 17 | h6 | 330 | 10.7 | +0.3 | 330 |
| 18 | h6 | 330 | 11.2 | +0.3 | 330 |
| 19 | h6 | 330 | 11.7 | +0.3 | 330 |
| 20 | h6 | 330 | 12.2 | +0.3 | 330 |
| 22 | h6 | 330 | 14.2 | +0.3 | 330 |
We can customize dimension for you.For more size information,
please kindly email or call us
Carbide Rod Grade Information
Carbide Rods Grades for Cutting Tools
| Grade | ISO Grade | WC% | Co% | Grain Size μm | Hardness (HRA) | Density g/cm3 | T.R.S. N/mm2 | Application |
| YG6X | K10 | 94 | 6 | 0.6-0.8 | 14.9 | 92 | 2000 | Suitable for processing Chilled cast iron, heat-resistant alloy
steel, and fine process of common cast iron |
| YL10.2 | K25-K35 | 90 | 10 | 0.4-0.6 | 14.5 | 92.8-93 | 4800 | Wear resistance and strength comparatively higher,suitable for PCB
micro drills,for making drills,end mill,reamer,taps,burrs etc. |
| YG10X | K35 | 90 | 10 | 0.6-0.8 | 14.5 | 90 | 2200 | Fine diameter micro drill, vertical milling cutter, rotary file |
Cutting steel class grade
| Grade | ISO Grade | Density g/cm3 | Hardness HRA | T.R.S N/mm2 | Application |
| YT5 | P30 | 11.50-13.20 | 90.0 | 1750 | Suitable for heavy duty cutting of steel and cast steel and for a
low-speed and medium-speed and a big feed-rate roughing operation
under unfavorable machining conditions |
| YT14 | P20 | 11.20-11.80 | 91.0 | 1550 | Suitable for semi-finishing and finishing machining of steel and
cast steel, using a medium feed-rate |
| YT15 | P10 | 11.10-11.60 | 91.5 | 1500 | Suitable for semi-finishing and finishing machining of steel and
cast steel and a medium feed-rate and a rather high cutting speed
is to be recommended |
| YC40 | P40 | 13.00-13.40 | 89.5 | 1860 | Suitable for heavy duty cutting of steel and cast steel with a
possible big feed-rate and for face milling as well. |
| YW1 | M10 | 12.85-13.40 | 92.0 | 1380 | Suitable for semi-finishing and finishing of stainless and ordinary
alloyed steel |
| YW2 | M20 | 12.65-13.35 | 91.0 | 1680 | Suitable for semi-finishing and finishing of stainless and low
alloyed steel, mainly used for machining of trains' wheel hubs |
| YW3 | M10 | 12.85-13.10 | 92.0 | 1420 | It is suitable for semi-finishing and finishing of stainless and
ordinary alloyed steel |
Application of tungsten carbide rod
Our tungsten carbide rod manufactured with high hardness and
toughness, vibration-resistance, especially no stick when working.
It is widely used for making
- various kinds of carbide solid tools and cutting tools, such as
drills, end mills, thread taps, rotating file,etc.
- A good material for general-purpose. Suitable for machining
carbon steel, cast irons, stainless steel, heat-resistance steel,
nickel based alloys and titanium alloys.
- Tungsten Carbide wear Parts
- Tungsten Carbide Mouldingdies
Production Features
- All carbide rods are made from the best tungsten carbide powders.
The carbide rods are with submicron and average grain size ,the
powder is even and stick together firmly,the purity of tungsten
carbide powders is quite high.
- All carbide rods are made by the extrusion machine which insure
that the inside structure of carbide rods is excellent and
apprerance of carbide rods if better ,the flatness is improved a
lot .
- All carbide rods are through HIP sintering which insure that the
inside structure of carbide rods is free pore and can stick
together firmly .Also the TRS is improved around 30% after HIP
sintering.
- Large stock of regular sizes of carbide rods ,which can enable us
to make the delivery within 24 hours.
- Replacement .we will replace the carbide rods for you if there is
any defects.
Our tungsten Carbide Rod Type
blank tungsten carbide rod, ground carbide rod, carbide rod with
hole, fixed carbide rod, chamfered carbide rod
For more detail size,pls email us,thanks
