K20 Blank Tungsten Carbide Round Bar With One Central Hole, Carbide
Tube
We manufactured and stocked a large range of tungsten carbide rod
with or without hole for you.
Our Diameter from 0.3mm to 40mm, the inner hole can be 0.1mm min
length in 310mm, 330mm or 340mm, or any length.
Grade inYL10.2, K10, K20 K30, K35 or etc.
Our Carbide rod types
1. Unground Solid rods
2. Single Central hole rods
3. Double parallel hole rods
4. Ground Carbide rod
5. Chmafered rods
6. One side chamfered with weldon shank rods
7. Special customized rods
Specification
| Material: | Wc+Co |
| Dimension: | OD12*ID6*300mm various size for choose |
| Grade | YG10 |
| Compostition | 10%Co+90%WC |
| Type: | carbide hollow round rod |
| Surface: | blank or grinding |
Production Process: | Power mixing-Pressing-HIP sintering-Blank- Processing- Finished |
Performance | High hardness, wear /corrosion resistancce, good toughness, good
straightness |
| Application: | production various types electrical machine & electronic
progressive dies and punches.And ceramics, printing machine,
plastic, rubber, leather industry and cutting machines, wear
resistant Parts |
| Non-standard or tolerance | can be customized |
Tungsten carbide is a kind of alloy made by powder metallurgical
process with the refractory carbides (such as tungsten carbide,
titanium carbide, tantalum carbide, niobium carbide, vanadium
carbide and chromium carbide) as the hard phase and cobalt or
nickel as the binder.It is divided into cutting inserts, wear
parts,mining tools, profiles and hard-facing material in terms of
the basical applications.
| Tugnsten Carbide Rod Features |
- Main application is for making PCB drills, drills,endmills and
reamers etc.
- Manufacture with 100% virgin tungsten carbide material - good straightness and precision - Excellent combinations of wear resistance and high toughness by
using sub-micron and ultra-fine grades.
- Anti-deformation and deflection.
- produces tungsten carbide rods with state-of-the-art technology including high precision automated presses, DORST extrusion equipment and HIP sintering
furnace |
Our common size models:
Size range(ODXIDXL mm) | Detail size and blank tolerance |
OD( mm) | ID (mm) | L(mm) |
ODxIDxL | 12 | 6/6.5 | 100-500mm |
ODxIDxL | 14 | 6/6.5/7/8/10 | 100--500mm |
| ODxIDxL | 15 | 6/6.5/7/8/10 | 100--500mm |
| ODxIDxL | 16 | 6/6.5/7/8/10/ | 100-500mm |
| ODxIDxL | 18 | 6/6.5/7/8/10/12 | 100-500mm |
| ODxIDxL | 20 | 6/6.5/7/8/10/12 | 100-500mm |
| ODxIDxL | 22 | 6/6.5/7/8/10/12 | 100-500mm |
| ODxIDxL | 25 | 6/6.5/7/8/10/12 | 100-500mm |
| ODxIDxL | 40 | 6/6.5/7/8/10/12/30 | 100-300mm |
| We are able to help you customized various diameter and length
carbide rod |
Some grade information for Reference
| Grade | Density g/cm3 | Hardness HRA(hv) | T.R.S (M Pa) | Performances &applications recommended |
| YL10.2 | 14.5 | 92.5 | 3800 | Wear resistance and strength comparatively higher,suitable for
processing cast iron, non-ferrous metal and non-metalloid
materials. |
| YG6 | 14.9 | 89.5 | 2150 | Good Wear resistance, used for hard wood,processing original
wood,aluminum section bar,brass rod and cast iron. |
| YG8 | 14.6 | 89 | 2320 | Suitable for the roughening of cast iron and light alloys and also
for the milling of cast iron and low-alloy steel. |
| YG11 | 14.4 | 87.5 | 2260 | Medium grain, for wear parts and mining tools |
| YG15 | 14.1 | 86.5 | 2400 | Medium grain, for mining tools, cold heading and punching dies |
| YS2T | 14.45 | 92.5 | 2800 | Fine carbide,high wear resistance,high bending strength,high
resistance to bonding, high thermal strength.Machining of
refractory alloys, stainless steel and high manganese steel
etc.Mainly used for disc cutter and other tools |
| YNi8 | 14.6 | 88.5 | 1710 | This grade with 8% nickel binder, it has good wear resistance&
corrosion resistance performance ,especially used for high pressure
environmental , also good for cutting the titanium alloy. |
Other tugnsten carbide grade information for reference
| YS series grades |
| Grade | ISO range | Density g/cm3 | Hardness HRA(hv) | T.R.S (M Pa) | Performances &applications recommended |
| YS2T | K30 | 14.40-14.60 | 91.5 | 2200 | It is belong with ultrafine grain alloy , suitable for low-speed
roughturning, milling, heat-resistant alloy and titanium alloy for
the cutters and tap, saw blade milling cutter is best . |
| YS8 | M05,K10 | 13.9 | 92.5 | 1720 | Suitable for high, stainless steel, high manganese steel and high
temperature alloy, silicon steel sheet, and cutting all kinds of
coating materials, also suitable for high hardness cast iron and glass and so on work pieces of rough machining, finish machining. |
| YS10 | M05,K10 | 14.30-14.50 | 91.5 | 2650 | Suitable for high nickel iron, ball mill infinite chilled cast iron
and white iron rough and finish machining, also used in rough
machining and finish machining of cast iron. |
| YS25 | P20,P40 | 12.80-13.20 | 91.0 | 2000 | Suitable for carbon steel, cast steel, high manganese steel, high
strength steel and alloy steel rough turning, milling and planing. |
| YS30 | P25,P30 | 12.45 | 91 | 1800 | Alloy ultra fine particles, suitable for large feeding high
efficiency milling all kinds of steel, especially the alloy steel
milling. |
YS5 | | 13.95-14.25 | 92 | 2000 | It is belong ultra fine grain alloy, suitable for high speed car,
milling, heat-resistant alloy and titanium alloy for the cutters
and tap, saw blade milling cutter is best |
| Cutting steel class grade |
| YT5 | P30 | 11.50-13.20 | 90.0 | 1750 | Suitable for heavy duty cutting of steel and cast steel and for a
low-speed and medium-speed and a big feed-rate roughing operation
under unfavorable machining conditions |
| YT14 | P20 | 11.20-11.80 | 91.0 | 1550 | Suitable for semi-finishing and finishing machining of steel and
cast steel, using a medium feed-rate |
| YT15 | P10 | 11.10-11.60 | 91.5 | 1500 | Suitable for semi-finishing and finishing machining of steel and
cast steel and a medium feed-rate and a rather high cutting speed
is to be recommended |
| YC40 | P40 | 13.00-13.40 | 89.5 | 1860 | Suitable for heavy duty cutting of steel and cast steel with a
possible big feed-rate and for face milling as well. |
| YW1 | M10 | 12.85-13.40 | 92.0 | 1380 | Suitable for semi-finishing and finishing of stainless and ordinary
alloyed steel |
| YW2 | M20 | 12.65-13.35 | 91.0 | 1680 | Suitable for semi-finishing and finishing of stainless and low
alloyed steel, mainly used for machining of trains' wheel hubs |
| YW3 | M10 | 12.85-13.10 | 92.0 | 1420 | It is suitable for semi-finishing and finishing of stainless and
ordinary alloyed steel |
Our factory advantage of tungsten carbide rod
1. Focusing on manufacturing tungsten carbide products over 13
years.
2. Specialist manufacturer equipped with advanced processing
machines
3. Over 15 tons/month productivity to assure sustainable supply of
products
4. Full ability to accept OEM & ODM orders
5. Stringent quality control and quality consistency.
6. Strict inspection for quality of raw material and finished
products
