TM-20T-4/6 Station tube end forming machine (20T type)
| main technical parameter | |
| Max suitable tube size | Φ80 |
| Max working stroke | 160mm |
| Hydraulic power | 20Ton |
| Station | 4 or 6 |
| Servo Die change speed | 0.05mm |
| working speed | 3-4sec |
| Machine characteristics |
| (1) PLC control, hydraulic drive, stable operation |
| (2) Touch screen control |
| (3) Mobile pedal switch with automatic, tight stop,continue three
consecutive modes |
| (4) Four / six station, servo die changing, high speed and
precision |
| (5) Die replacement is simple and suitable for elastic production |
| (6) Can shrink tube, expand tube, tampering process. |
Advantages:
1. Low cost for operator training,high production effeciency and
product uniformity.
2. Drived by electric servo motors.compared with hydraulic drive,it
has higher stability and longer lifetime.It is unnecessary to worry
about oil-leak or working temperature.
3. Gapless tube bending,with long-time high precision and
processing efficiency,easy for operation.It has good compatibility.
4. Small in size,low noise level
5. Low running cost,with best cost performance for tube processing.
6. Widely used in small-diameter tube processing,for example tubes
of air conditioner and oil tube for autos
Standard models:1~5 stacks,4~6 servo motors
Advanced motor:11 fully electric servo motors
Applications:
Auto,motorbike,aircraft,bicycle,kids bike,fitness
equipment,furniture,outdoor equipment,air conditioner,food
machinery,nulcear tube such as reactor,evaporator and heat
exchanger
Features
1. The electric control system uses famous Japanese
controllers,such as servo drivers,servo motors,positioning modules
and CPUs manufatured by the Mitsubishi Corporation,and is high in
performance and good stability.
2. The Mitsubishi ultra-large CPU can accommodate 400 groups of
files for compiling,if necessary,the additional transmission
software is bought and installed in the computer,and the documents
and files are stored in the hard disk,so that the number of
compiling groups is unlimitedly expanded.
3. Industrial-use computer type:the WINDOWS operating system is
internally installed,and used together with the Mitsubishi servo
system,besides the Mitsubishi servo driving,the convenient file
management owned by the WINDOWS operating system is also
provided;and the files can be storted in the hard disk or soft
disk,so that the compiling groupnumber is unlimitedly expanded.
4. Automatic 3D simulation function for tube-forming is selected as
required.
5. An automatic error-fault detecting function is provided,and the
errors and faults are displayed on the screen,so that the operator
can much easily troubleshoot.
6. Automatic 3D simulation function for detecting interferring
position is selected as required.
7. All processing data are inputted by the touch screen
8. Based on the change of materials,each curve is set with a
compensation value,a speed and a demoulding gap.
9. Each curve of one tube can be programmed with five action
sequences and ten-stage speeds,so that the processing efficiency is
improved,and the interference point is reduced.
10. Chinese/English language are switched to display on the touch
screen,and customers can also purchase the machine installed with
other languages
