CNC 18REM Tube bender
1. tube bending machine
2. High precision,Wide application
3. CE Certification, ISO Certification
4. High performance and easy to operate
machine characteristics | | main technical parameter | |
| (1) Electical servo bending | Max capacity | round tube/iron tube ( S=40kgf/mm ) | 18x1.6t |
| (2) Imported servo motor and reducer | Round tube/non iron metal tube
( S=25kgf/mm ) | 20x2.0t |
| (3) Independent R & D software system | Round tube /stainless steel tube
( S=60kgf/mm ) | 18x0.8t |
| (4) 1-6 layer die optional | Square tube/Metal Tube
( S=40kgf/mm ) | 15x15x1.2t |
| (5) 11 axis full motor type optional | Round bar( S=40kgf/mm ) | 8 |
| Max capacity | precision | ±0.05 |
| max speed | 180°/sec |
| Servo material feeding axis | precision | 0.05mm |
| Max speed | 1200mm/sec |
| Servo tube rotate axis | precision | 0.05 |
| Max speed | 300°/sec |
Machine characteristics:
1, Automatic tube bending machine workstation, Tube forming in one
time .
2, Reduce labor ,saving labor cost.
3, Two automatic feeding machines each feed the tube bender
automatically, and a robot loads and palletizes the two tube
benders at the same time.
4, The whole process all is controlled by PLC , with touch screen
man-machine interface, the efficiency is improved wholely
5, Automatic Identification of tube welds to make tube Bend Machine
avoid Weld seam
6, Use Industrial Robot for loading and unloading stacking
Applications:
Auto,motorbike,aircraft,bicycle,kids bike,fitness
equipment,furniture,outdoor equipment,air conditioner,food
machinery,nulcear tube such as reactor,evaporator and heat
exchanger
Features
1. The feeding mode comprises the clamping feeding mode or the
direct feeding mode which is selected as required.
2. The X.Y.Z coordinate can be automatically switched into the
Y.B.C processing values
3. After the data are compiled,the data is protected by a key,so
that the data are prevented from any modification.
4. The electric control system is equipped with a heat exchanger
for automatic heat dissipation;if necessary,a numerical control
type refrigerator can be additionally bought,so that the life span
of the electric control system is ensured.
5. An automatic oil charging system is installed to reduce friction
of the bending tube.It prolongs the lifetime of the core rod and
improves the quality of the bended tube.
6. The machine can be connected with a printer so as to print the
data displayed on the screen.
7. Communication interface can be installed as required,which can
be connected to our company.Our engineer will provided remote
service of real-time monitoring,data updating,failure checking and
so on.
8. A feeding cart’s feeding position,safety position,wheel mode
interfering position and guided mode interfering position are
set,so that a hand wheel pulse wave generator can be finely
tuned,the position can be automatically remembered,and the error
caused by the manual measurement and the loss caused by the feeding
cart bumping the machine are eliminated
9. The feeding shaft will perform automatic detection before
acting,so that the feeding shaft is avoided from bumping the
machine
10. When the curves are tested,analytical actions can be used,the
actions are modified by the careful observation of the interference
points ,so that the efficiency is improved.
