CNC80RHS Tube bender
machine characteristics | | main technical parameter | |
| (1) Electical servo bending | Max capacity | round tube/iron tube ( S=40kgf/mm ) | 80x2.8t |
| (2) Imported servo motor and reducer | Round tube/non iron metal tube ( S=25kgf/mm ) | 80x5.2t |
| (3) Independent R & D software system | Round tube /stainless steel tube( S=60kgf/mm ) | 80x1.9t |
| (4) 1-6 layer die optional | Square tube/Metal Tube ( S=40kgf/mm ) | 60x60x2.6t |
| (5)11 axis full motor type optional | Round bar ( S=40kgf/mm ) | 38 |
Push-bending type, bending radius7D | Servo bending axis | precision | ±0.05 |
RBE strongly back push bending, minimum bending radius is 1D | Max speed | 65°/sec |
| Servo material feeding axis | precision | 0.05mm |
| Max speed | 750mm/sec
RBE: 150mm/sec |
| Servo tube rotate axis | precision | 0.05 |
| Max speed | 180°/sec |
Advantages:
1. Low cost for operator training,high production effeciency and
product uniformity.
2. Drived by electric servo motors.compared with hydraulic drive,it
has higher stability and longer lifetime.It is unnecessary to worry
about oil-leak or working temperature.
3. Gapless tube bending,with long-time high precision and processing
efficiency,easy for operation.It has good compatibility.
4. Small in size,low noise level
5. Low running cost,with best cost performance for tube processing.
6. Widely used in small-diameter tube processing,for example tubes of
air conditioner and oil tube for autos
Standard models:1~5 stacks,4~6 servo motors
Advanced motor:11 fully electric servo motors
Applications:
Auto,motorbike,aircraft,bicycle,kids bike,fitness
equipment,furniture,outdoor equipment,air conditioner,food
machinery,nulcear tube such as reactor,evaporator and heat
exchanger
Features
1. Automatic 3D simulation function for detecting interferring
position is selected as required.
2. All processing data are inputted by the touch screen
3. Based on the change of materials,each curve is set with a
compensation value,a speed and a demoulding gap.
4. Each curve of one tube can be programmed with five action
sequences and ten-stage speeds,so that the processing efficiency is
improved,and the interference point is reduced.
5. Chinese/English language are switched to display on the touch
screen,and customers can also purchase the machine installed with
other languages
6. The feeding mode comprises the clamping feeding mode or the direct
feeding mode which is selected as required.
7. The X.Y.Z coordinate can be automatically switched into the Y.B.C
processing values
8. After the data are compiled,the data is protected by a key,so that
the data are prevented from any modification.
9. The electric control system is equipped with a heat exchanger for
automatic heat dissipation;if necessary,a numerical control type
refrigerator can be additionally bought,so that the life span of
the electric control system is ensured.
10. An automatic oil charging system is installed to reduce friction
of the bending tube.It prolongs the lifetime of the core rod and
improves the quality of the bended tube.
11. The machine can be connected with a printer so as to print the
data displayed on the screen.
12. Communication interface can be installed as required,which can be
connected to our company.Our engineer will provided remote service
of real-time monitoring,data updating,failure checking and so on.
13. A feeding cart’s feeding position,safety position,wheel mode
interfering position and guided mode interfering position are
set,so that a hand wheel pulse wave generator can be finely
tuned,the position can be automatically remembered,and the error
caused by the manual measurement and the loss caused by the feeding
cart bumping the machine are eliminated
14. The feeding shaft will perform automatic detection before
acting,so that the feeding shaft is avoided from bumping the
machine
15. When the curves are tested,analytical actions can be used,the
actions are modified by the careful observation of the interference
points ,so that the efficiency is improved.
