Pneumatic Actuated Ball Valve On-off & Modulating Type 1/2" - 16"
Pneumatic Actuated Ball Valve provides a cost-effective solution
for the shut-off control of medium flows. Actuation is either
single or double acting with a range of configurable options
including limit switches, solenoid valves, positioners, FRLs and
gearbox overrides.
Kolink Pneumatic Actuated Ball Valves could be assembled via either
bracket connection between the valves and actuators, or the direct
ISO5211 mounting pads. The pneumatic quarter-turn rack-and-pinion
actuator is sized with a 30% - 50% safety factor built-in, based on
a pilot pressure of 6 Bar.
Pneumatic Actuated Ball Valve is suitable for industrial
applications; on/off duty, water isolation, water treatment and
compressed air, offering a good cost saving typically against
electric actuated valves.
Features of Pneumatic Actuated Ball Valves:
Standard Double Acting Pneumatic Actuator
Optional Single Acting Spring-return Pneumatic Actuator for Fail
safe
Optional limit switches, solenoid valves, positioners, FRLs and
gearbox overrides
Fire Safe to API 607
Antistatic Design
Anti-blowout Stem
Applicable Standards of Pneumatic Actuated Ball Valves:
a) Design & Manufacture: API 6D, BS 5351, API 608, ISO 17292, MSS
SP-72
b) Fire-safe: API 607, API 6FA
c) Face to Face: API B16.10, API 6D, EN 558, DIN 3202
d) End Connection: ASME B16.5, EN 1092, JIS B2220, ASME B16.25
e) Test and Inspection: API 6D, EN 12266, API 598
