Industrial Gyroscopic Electric Paint Shaker Machine 710 Times / Min With LCD Display

• Time of Mixing: 1-9min

• Size of Mixing can: 0.5L~20L

• Maximum weight of mixing can: 30KG

• Suitable can height: 80~410mm

• Suitable can bottom size:350(L)*350(W) mm

• Power Supply: 220V/110V

• Rated Power: 750W

• Net Weight: 223KG

• Gross Weight: 259KG

• Machine Size: 740(l)*800(w)*1070(h)mm

• Packing Size:770(l)*840(w)*1210(h)mm

• Chinese and english interface on the control panel for easy operation.
• Large door with front roller for easy can loading.It’s suitable to 0.5L-20L all kinds of can/barrel, max load weight is 30kg.
• Easy operation and few maintainence: with LCD diplay, can set the shaking time freely by the “T1”“T2” “T3” time key, the longest time can be set is 9 mins.
• Automatic clamp and adjustable pressure to bear on the can according to the can size, will not squish or stave the can.
• High speed and thoroughly mixing by up and down continuous multi-shake movement.
• Low noise and high safety.

• T1 button (1 min button): press this button, the clamping plate automatically clamps the canister, and finish appointed 1 minute mixing.
• T2 button(3 min button): press this button, the clamping plate automatically clamps the canister, and finish appointed 3 minutes mixing.
• T3 button(5 min button): press this button, the clamping plate automatically clamps the canister, and finish appointed 5 minutes mixing.

T1+T2: Press T1+T2 at the same time , clamping plate automatically clamps the canister, and finish appointed 4 minutes time mixing.

T1+T3: Press T1+T3 at the same time , clamping plate automatically clamps the canister, and finish appointed 6 minutes time mixing.

T2+T3: Press T2+T3 at the same time , clamping plate automatically clamps the canister, and finish appointed 8 minutes time mixing.

T1+T2+T3: Press T1+T2+T3 at the same time , clamping plate automatically clamps the canister, and finish appointed 9 minutes time mixing.

Button (Stop, lift button) :
A). When machine is in the state of "Mixing" or "Clamping", LCD shows "Mixing" or "Clamping". At this time, press this button, machine will stop mixing or clamping and lift the clamping plate.

B). When machine is in the "ready" state, LCD shows "Ready". At this time, press this button, the clamping plate will lift up, and stop when you release the button.

• Inspection: You can send inspectors to our factory for inspection or we self-inspect following the technical requirements mentioned in contracts.
• Testing of equipments: all our machines are tested before shipment. All machines are at its optimal state when shipped.
• Warranty: We offer a period of one year warranty for each equipment. Within guarantee period, we can help you judge the fault according to the failure phenomenon by E-mail. and send replacement part to you. If the fault has been caused by mis-use or abnormal conditions of operation, repairs will be billed at a normal cost in this case. An estimate will be submitted before repair work is started in case requested.
• Training:You can send personnel to our factory for free training on the machine.

Foshan YiJiu Paint Tinting Equipment Co., Ltd. was established in 2010. locates in Shunde ,China. which is widely famous for its developed manufacturing business. We are specialized in paint tinting and mixing equipments, collect R&D, manufacturing, sales and after sales service together.

In line with reliable, sincere, reciprocal, mutually beneficial, YiJiu Co. have been and will keep provides high quality, high accuracy, high cost-effective paint equipments to all our customers. Thanks to the know-how of our technicians and the well trained administrative staffs. we are able to offer considerate and responsible service.

We have wide connections with wholesalers and retailers all over the world. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!