20 L automatic shaker and paint color mixing machine for retailers
Sample Show
Technical Data
Time of Mixing: 1-9min
Size of Mixing can: 0.5L~20L
Maximum weight of mixing can: 30KG
Suitable can height: 80~410mm
Suitable can bottom size:350(L)*350(W) mm
Power Supply: 220V/110V
Rated Power: 750W
Net Weight: 223KG
Gross Weight: 259KG
Machine Size: 740(l)*800(w)*1070(h)mm
Packing Size: 770(l)*840(w)*1210(h)mm |
Machine Application
YJ-2S-02 automatic shaker is wide-used for liquid mixing machine.
It is designed professionally according to different features of
coating and colorant.The unique elliptical track mixing design
ensures the efficient mixing.It's operation interface is advanced
and simple.The shape combines square and round to form a protective
device.
Features
- Automatic clamp and adjustable pressure to bear on the can according to the can size, will not squish or
stave the can.
- Fit for a lot size of can:It’s suitable to 0.5L-20L all kinds of can/barrel, max load weight
is 30kg.
- Easy operation and few maintainence: with LCD display, can set the shaking time freely by the “T1”“T2”
“T3” time key, the longest time can be set is 9 mins.
- High speed and thoroughly mixing :up and down continuous multi-shake movement.
- Low noise and high safety: With the separation of body from shaking part, a user can finish
mixing in a quiet environment.
- Chinese and english interface on the control panel for easy operation.
- Large door with front roller for easy can loading.
Safty door: If the door isn't closed well, the machine won't start working.
Can platform : It can adjust height automaticly according to your can size;
.
Control panel introduction
T1 button (1 min button): press this button, the clamping plate automatically clamps the
canister, and finish appointed 1 minute mixing.
T2 button(3 min button): press this button, the clamping plate automatically clamps the
canister, and finish appointed 3 minutes mixing.
T3 button(5 min button): press this button, the clamping plate automatically clamps the
canister, and finish appointed 5 minutes mixing.
T1+T2: Press T1+T2 at the same time , clamping plate automatically clamps
the canister, and finish appointed 4 minutes time mixing.
T1+T3: Press T1+T3 at the same time , clamping plate automatically clamps
the canister, and finish appointed 6 minutes time mixing.
T2+T3: Press T2+T3 at the same time , clamping plate automatically clamps
the canister, and finish appointed 8 minutes time mixing.
T1+T2+T3: Press T1+T2+T3 at the same time , clamping plate automatically
clamps the canister, and finish appointed 9 minutes time mixing.
Button (Stop, lift button) :
A). When machine is in the state of "Mixing" or "Clamping", LCD
shows "Mixing" or "Clamping". At this time, press this button,
machine will stop mixing or clamping and lift the clamping plate.
B). When machine is in the "ready" state, LCD shows "Ready". At
this time, press this button, the clamping plate will lift up, and
stop when you release the button.
Our Service
- Inspection: You can send inspectors to our factory for inspection or we
self-inspect following the technical requirements mentioned in
contracts.
- Testing of equipments: all our machines are tested before shipment. All machines are at
its optimal state when shipped.
- Warranty: We offer a period of one year warranty for each equipment. Within
guarantee period, we can help you judge the fault according to the
failure phenomenon by E-mail. and send replacement part to you. If
the fault has been caused by mis-use or abnormal conditions of
operation, repairs will be billed at a normal cost in this case. An
estimate will be submitted before repair work is started in case
requested.
- Training:You can send personnel to our factory for free training on the
machine.
TERMS OF WARRANTY
Limited Warranty: We offer a period of one year warranty for each equipment. Within
guarantee period, we can help you judge the fault according to the
failure phenomenon by E-mail. and send replacement part to you. If
the fault has been caused by mis-use or abnormal conditions of
operation, repairs will be billed at a normal cost in this case. An
estimate will be submitted before repair work is started in case
requested.
The user must keep the machine in a proper working condition.
Broken parts and accessories must be replaced.with original
appropriative parts of the machine.
The manufacturer's warranty expires under below conditions: Twelve months after date of invoicing; In case of inexpert use; In case of non-original spare parts are used; In case of repairing/adaptation of the machine without written
approval and/ or by unauthorized personnel; In case of non-fulfillment of the maintenance, operation or other
instructions reflected in this manual. |
