High Efficiency Power 4.5 KW HHO Engine Carbon Cleaning Machine For
Combustion Chamber
Emission standards for gas engines:
For cars running on gasoline, carbon monoxide (CO) emissions must
be less than 4.5% for engines built between 1972 (the year in which
the first anti-pollution standards went into effect) and September
1986.
3.5% for engines built between October 1986 and 1993 (1995 if
without a catalytic converter).
0.5% at idle and 0.3% at 2,500 revolutions/minute for engines built
between 1996 and July 2002 for vehicles without integrated
anti-pollution equipment, and between 1994 and 1995 for vehicles
with integrated anti-pollution equipment.
0.3% at idle and 0.2% at 2,500 revolutions/minute for engines built
after 2002.
Therefore, in order to decrease the air pollution caused by car
exhaust, the car should do carbon cleaning in time.
Product Parameter:
| Model Number | HO-1500 |
| Voltage | AC 110V~380V single phase |
| Frequency | 50/60HZ |
| Rated Power | <6KW |
| Gas Output | 1500L/h ±10% |
| Weight | 120kg |
| Size | 600*600*1100mm |
| Package Dimension | 600*650*1250mm |
| Ambient temperature range | 5°C~50°C |
| Application | Vehicles engines |
What is car carbon cleaning?
Carbon Cleaning using HHO gas cleans away the carbon build-up
efficiently and without mess or harm to the environment. The
results are more low RPM power in a smoother running and more
efficient engine. Different from the traditional carbon reducing
methods; no pollution, no harmful gases or chemical additives to
harm you, your car or the environment. Save time and money by using
the Carbon Cleaning System; increase your business potential,
customer base and profits. After using the Car Carbon Cleaning
machine, carbon build-up is completely cleaned away, engine
efficiency is increased, power and performance are restored, life
expectancy is improved and engine emissions are reduced.
The effect of carbon cleaning:
- Improve engine power by 20%, save oil by 15%, reduce emission by
72%
- Clean combustion chamber, prolong engine overhaul time
- Flush sensors, extend the life of the oxygen sensor
- Cleaning ternary catalytic, prolong the service life
- Scour the exhaust pipe wall improve the power, save fuel by more
than 15%
- Reduce harmful exhaust gas emission more than 60%
Working principle of Car carbon cleaning machine:
- The Carbon Cleaning decarbonization station is easy to use, fast,
efficient, and completely autonomous.
- The station automatically manages the pulsed hydrogen flow. The
heating effect of hydrogen makes it possible to raise the
combustion temperature to trigger a pyrolysis, essentially a
chemical reaction that serves to remove, burn off, disintegrate,
and eliminate carbon deposits.
- To install, simply insert the hose of the Carbon Cleaning station
into the air intake duct and then connect the clamps on to the
positive and negative terminals of the vehicle’s battery.
- By activating the timer, you have the ability to choose the
duration of the cleaning, which varies according to the
contamination level of the vehicle. While the machine is operating,
please allow the vehicle to idle.
