High Efficient Central Air Conditioner Heat Pump Intelligent
Management
Central Air Conditioner Heat Pump Features
(1) The air source heat pump system is a combination of cold and
heat sources. There is no need to set up a special freezer room or
boiler room. The unit can be placed on the roof or the ground at
will, without occupying the effective use area of he building. The
construction and installation is very simple.
(2) The air source heat pump system has no cooling water system, no
cooling water consumption, and no power consumption of the cooling
water system. In addition, there have been many reports of
Legionella infections caused by cooling water pollution. From the
perspective of safety and hygiene, considering air source heat
pumps also has obvious advantages.
(3) Air source heat pump system Because the boiler is not needed,
the corresponding boiler fuel supply system, dust removal system
and flue gas emission system are not needed, the system is safe and
reliable, and has no pollution to the environment.
(4) Air source heat pump The cold (hot) water unit adopts modular
design. It does not need to set up a standby unit. During the
operation, the computer automatically controls and adjusts the
running status of the unit to make the output power adapt to the
working environment.
(5) The performance of air source heat pumps will vary with outdoor
climate changes.
(6) In places where the outdoor air temperature in the north of
China is low, an auxiliary heater is required due to insufficient
heat supply in the winter of the heat pump.
Model data/ Parameter of Central Air Conditioner Heat Pump
A7W35 working condition: inlet air temperature 7℃, outlet water
temperature 35℃
a: Nominal heating conditions: ambient dry bulb temperature-12℃,
wet bulb temperature-14℃, outlet water temperature 41℃, water flow
0.172 * nominal
| Model | SLNA-032Y | SLNB-035Y | SLNB-047Y | SLNC-075Y |
| Compressor capacity | 10HP | 12.5HP | 15HP | 25HP |
| Function | Heating and Cooling | Heating and Cooling | Heating and Cooling | Heating and Cooling |
| Electricity | 380V-3N-50Hz | 380V-3N-50Hz | 380V-3N-50Hz | 380V-3N-50Hz |
| Working conditions | ℃ | -25~+45 | -25~+45 | -25~+45 | -25~+45 |
| Data | Heata | Nominal capacity | KW | 21.5 | 22.3 | 28.1 | 44.5 |
| Input power | KW | 9.1 | 9.4 | 11.7 | 18.3 |
| COP | / | 2.3 | 2.35 | 2.4 | 2.4 |
| Heating IPLV(H) | 2.7 | 2.7 | 2.7 | 2.7 |
| Coolb | Nominal capacity | KW | 25 | 28 | 39 | 62 |
| Input power | KW | 10 | 10.4 | 13.1 | 20.7 |
| COP | / | 2.5 | 2.7 | 2.9 | 3 |
| Cooling IPLV(C) | 2.7 | 2.7 | 2.7 | 2.7 |
| A7W35c | KW/COP | 32.0/4.1 | 35.0/4.1 | 47.0/4.1 | 75.0/4.2 |
| A2W35 | KW/COP | 27/3.60 | 28.5/3.60 | 39.5/3.20 | 62.5/3.20 |
| A-7W35 | KW/COP | 21.5/2.8 | 23.5/2.9 | 32/2.9 | 50/2.9 |
| A-15W55 | KW/COP | 19.7 /1.94 | 20.2 /1.94 | 28.1/1.94 | 45.5 /1.97 |
| A-20W45 | KW/COP | 18.1/2.02 | 18.7/2.02 | 23.6/2.03 | 37.4/2.04 |
| Max. running currency | A | 25 | 27 | 35 | 56 |
| Compressor quantity | set | 2 | 1 | 2 | 2 |
| Refrigerant/charging quantity kg | / | R22/3.7*2 | R22/9 | R22/10 | R22/15*2 |
| Air blow type | / | Top | Side | Top | Top |
| Water pipe diameter | mm | 32 | 32 | 50 | 50 |
| Rating flow | m³/h | 5.5 | 5.9 | 8.3 | 12.6 |
| Water side pressure loss | kPa | ≤45 | ≤45 | ≤45 | ≤45 |
| Noise level | dB(A) | 62 | 62 | 62 | 62 |
| Overall dimensions(L×W×H) | mm | 1530×750×1370 | 1490×900×1900 | 1450×1100×2080 | 2100×1100×2080 |
| Weight | kg | 320 | 350 | 470 | 730 |
Our service
- Engineer design drawing
- Central control system, automatic and easy operation
- Inquiry reply within 24hours
- fast delivery 1-2 weeks
