2Kpa Resolution Bursting Strength Tester Equipped with Memory and
Printing Function
Application
Materials to carry weight or strength should be tested using an
exploding tester to ensure that the explosion force is compliant
with requirements, before making it into final products like truck
covers, plates, trampoline fabric, pool covers, compactor curtains.
Electronic bursting strength equipment provides recycled rubber
diaphragms with the electronic pressure reader with full lock. The
LED lamp is automatically applied for simple observation with a
clear acrylic ring.
Sets of 7.3 cm 2 (Φ30.5mm / l.22inch), 10cm2 (Φ 35.7 mm), 50cm2 (Φ
79.8 mm), 100cm2. The balls and clamping rings are interchangeable
(Φ 112.8 mm).
Three test methods, constant bursting rate, some pressure bursting
and some extensions are provided for the bursting strength testing
machine.
This explosive test is also referred to as the mullen bursting
test, since its analysis technique is commonly referred to as the
Mullen Burst sample, in which the test is splintered across a dia.
1.22 inch and a diaphragm of the rubber below will be swollen to
transfer the specimen until it ruptures.
Specification
Resolution 2Kpa
Test Head and Clamp: 50cm2(Φ79.8mm), 7.3cm2(Φ30.5mm), the other
sizes are available on request
Automatic-clamping offers firm and reliable clamping
Large colorful touch panel, can be operated without computer
High-accuracy servo-motor driving system
Equipped with memory and printing function, supporting on-line
operation
Standards
ASTM 3786-06 ISO 2758 ISO 13938-2 BS 3424
BS 3137 BS 4768 AS 2001.2.4 GB/T 7742
IWSTM 29 EDA NA 80.4-02 EDA NA 80.3-99 BS 2922
FZ/T 60019 JIS L 1018.6.17 NEXT 22 2206 FZ/T 01030
Models | TF142A 2000 kPa (290 psi)
TF142B 10000 kPa (1450 psi) |
Power | 220 /110 V 50/60 Hz |
Weight | 170 Kg |
Dimensions | 620 x 450 x 530mm (L x W x H) |
