Factory Selling Free Designing ASRS Unit Load Pallet Storage
Warehouse Solution
Automatic Warehouse Storage System (AS/RS) use an interated
logistics management computer control system and use advanced
technologies such as laser positioning technology, barcode sanning,
and Rf system. The WMS can exchange information with EPR system,
with multiple functions and reliable performance. The automatic
warehouse system plays an increasingly important role in the
warehouse and distribution centers of various industries.
AS/RS consists of racking system, stacker crane, conveyor system,
electrical control system, network, and management system.
The most advantageous part of the automation system is fast and
accurate,100% FIFO and picking. The system height can reach more
than 30 meters, and the length is better more than 40 meters.
Height and length can be designed according to requirement.
Introduction of double column stacker
The double-column stacker is one of the main components in the
Automated Warehouse. It is different from the single-column
stacker, the frame structure has two rectangular frames, the upper
beam and the lower beam. The structural rigidity is better and the
quality is better, larger than a single column stacker. Applicable
to all kinds of lifting height warehouses, generally lifting up to
5 tons, if necessary, can be larger, can be used for high-speed
operation. The double-column stacker runs in the roadway between
the shelves, and is mainly used to transport the unit goods loaded
on the pallet or in the cargo box; or before the corresponding
cargo space, the organic personnel pick the goods out according to
the requirements out of the warehouse.
Working Principle
| Inventory | The goods are put on the front end of the storage tunnels by the
forklift truck, through radio remote control shuttles, can carry
pallets of goods in track operation |
| PICK | radio remote control shuttle carries the pallet from the farthest
end of the storage tunnel to the nearest end of the racking system,
put down the pallet from the racking system by the forklift truck |
| Shuttle | The shuttle can be place in different storage tunnel by the
forklift, several storage tunnels can share a shuttle. The quantity
of shuttle is depend on the depth of the storage tunnel, total of
goods, shipping quantity, shipment frequency and other factors |
ASRS warehouse rack mainly consists of following parts:
| Racking | Structural feature: AS/RS System are usually equipped with pallet
racking and drive-in racking, both of which are composite
structure. Steel panels and wooden panels are available for loading
with good capacity. Conveyors will do the loading and unloading job
under the instruction from the central computer. AS/RS System is
mainly used in the food, tobacco, electronic, mechanical and
armament industry. |
| Stacker | Structural feature: Double upright structure, steady and reliable,
vector frequency conversion drive and encoder position control,
mechanical and electronic safety devices to ensure safe using of
the system; All the way tracing technology by information
transferring; Electric components are imported from abroad;
Touching screen interface for easy operation; Making manual,
semiautomatic, automatic and linkage control come true; Used in
many situations by combining with other logistics equipment. |
| Conveying system | Structural feature: Conveying system is usually equipped in the
front or back of warehouse for conveying goods here and there,
bridging the procedures done by forklifts and stackers by using
rolling conveyor or chain conveyor and combining with lifts,
rotating devices and other equipments. |
| Controlling system | Structural feature: Communicating with WMS and ECS through OPC
agreement, PROFIBUS bus network, set up by Siemens S7-300
controller can operate all conveyors offline, doing conveying of
goods automatically.
Please refer to the attached drawing for details of conveying
system |
| WMS System | Hardwares of WMS System: Star network structure, network sever, RF
server, computers for management and monitor, RF base station and
RF terminal for in/out warehouse of goods. |
Advantages
1. High density storage style, high warehouse utilization rate
2. High work efficiency, greatly reduce operating time
3. Operating flexibility, the access of goods can be FIFO, can also
be FILO
4. And good safety, reduce damage, improve safety productivity
Benefits
1. Dramatic improvements in operator efficiency and storage
capacity .
2. Reduction of work-in-progress inventory .
3. Improvements in quality and Just-in-Time performance .
4. Provides make-to-order capability in addition to
make-to-inventory production .
5. Real-time inventory control and instantaneous reporting
functionality .
Application
| 1 | Goods of large quantity and few kinds: food, beverage, chemical,
tobacco and other single kinds of items and of large quantity, etc. |
| 2 | Refrigeratory exercise: reduce low temperature working time,
improve work efficiency and operation safety. |
| 3 | Deadline management: articles on strict requirements batch, require
FIFO operations management warehouse |
| 4 | Increase storage capacity: the limited storage space, need to
maximize the use of space of warehouse. |
Beam
Please provide information for quick quotation
1. Pallet Size (Length*Width*Loading Height in mm)
2. Layout or Dimension (Length*Width*Net Height in mm) of your
warehouse
3. Rack Size (Length*Width*Depth in mm) if you are available or we
shall design for you
4. How many bays and levels if available
5. Loading Capacity(kg) of each level or each pallet
Production Of ASRS Rack
Main Products
Why Choose HUICHEN?
1.17 years experience on manufacturing warehouse racking;
2.All types of racking comply with ISO9001, CE etc;
3.Have successfully done thousands of racking project;
4.Factory direct sale price, no cost for middle distributor.
Really important to choose a reliable warehouse racking supplier!!!
Service
Contact Us
Email: heidi@huichen.cn
Mobile: +86 176 6062 0398
