Universal Fiber Optic Equipment Fiber Optic Curing Oven PID
Algorithm Control
The multifunctional curing oven using industrial control chip, PID
algorithm control temperature,can set temperature and time , the
digital display temperature, a buzzer to alert. Provide good
human-machine interface, effectively improve the curing speed.
Parameter
- Voltage:AC220V/50Hz
- Power:1000W
- Control range:0~200℃
- Control percise:±1℃
- Timer range:1~99min 99seconds
- Machine Dimension:405×320×135mm
- Net weight:6.5KG
- Package dimension:400×490×180mm
Setting temperature
Press and hold the “SET” key for 5 seconds, can enter the
temperature setting pattern, the number will be shine, Press the
“<” key to set up temperature of number. Press the “︽” key to
increase the temperature in operation, press “︾” key to reduce
temperature in operation. And press the”SET” key to exit
temperature setting. When the set time,If don’t press any key
within 10 seconds.
It will automatic exit temperature setting.
Setting time
Press and hold the”>” key for 10 seconds to enter setting time
mode,Display will be(03-2). It will be automatic stop after 5
seconds. At this time,press this button again then the number will
be shine on the left. Press the “>” key to confirm the ones,tens
hundreds and thousands. Press the”︽” key to adjustment the times.
It will be automatic stop after 5 seconds. When the set time,If
don’t press any key within 10 seconds,It will automatic exit time
setting.
Time activation
Press the”RST” key, the timer start to count down,Display
automatically switches to the countdown time. When the timer time
display is same with the set time display. The buzzer will alert.
When press the key of “RST” again will be stop timing alert. And
then to work next time must press the key of “RST” to start for
timer.
Accessories:
- one set machine
- one piece power line
- two pieces heating block
- one piece instruction
Packaging
