PLC Control Corrugated Cardboard Automatic Round Die Cutting
Production Machine
Main features:
Die-cutting:
1. Die-cutting roller for excellent steel quality, wall thickness
30mm, balance correction, hard chromium plating;
2. The wall panel is made of high quality cast iron, the wall
thickness is 50mm, and the large machining center is produced.
3. Improve the repeat utilization rate of rubber sleeve for the
automatic grinding machine of the roller, which can be repaired 3-4
times;
4. Automatic compensation of linear velocity ensures that the
die-cutting size of each batch of cartons is exactly the same;
5. Imported American CUE polyamine resin pad for easy installation
and cutting 12 million times;
6. The horizontal movement of the mechanical roller is 40mm, and
the adhesive pad is evenly worn.
7. The six grade fine grinding gears are made of 40cr, with low
noise and long service life.
Computer part:
1. Man-machine interface, complete computer PLC precision control
system;
2. The main engine adopts variable frequency control motor;
3. The front and rear control panel is concise and centralized and
easy to operate;
4. The whole machine is controlled by the combination of light,
electricity and gas.
Feeding part:
1. Adsorption automatic feed paper, once complete the slot, cutting
Angle, indentation, punch;
2. The speed of paper delivery is 10,000 pieces per hour, with the
die cutting accuracy of plus or minus 0.75mm;
3. The phase adopt the planetary gear electric adjustment, the
startup stop is rapid adjustment;
4. Manual adjustment of front board board, electric adjustment of
side baffle board;
The guide roller has grooved surface to prevent the paper from
being crushed
| Parameter | Unit | Model |
| Max.paper coverage area | Mm2 | 1370*2000 | 1370*2200 | 1370*2400 |
| Effective die-cutting area | Mm2 | 1350*1800 | 1350*2000 | 1350*2200 |
| Max.mechanical speed | Pcs/min | 60 | 60 | 60 |
