Hand Held 40khz Ultrasonic Food Cutter With Digital Generator No
Sticking Knife
Description:
Ultrasonic cakes/food cutters are often used to cut the most common
desserts and candies, whether it is soft or contain fat, sugar,
honey, cream or chocolate, which does not affect the uniformity of
the food in any way. Ultrasonic cutters ensure clean cutting and
precision. Compared with traditional cutting machines, ultrasonic
food cutting knives are characterized by more hygienic cutting,
shorter downtime, higher cost-effectiveness, higher consistency of
cutting surfaces and longer blade life.
The principle of an ultrasonic rubber cutter is to convert a 50/60
Hz current into 20, 30 or 40 kHz of electrical energy by means of
an ultrasonic generator. The converted high-frequency electrical
energy is again converted by the transducer into mechanical
vibration of the same frequency, and then the mechanical vibration
is transmitted to the cutting blade through a set of amplitude
modulator devices that can change the amplitude. The ultrasonic
rubber cutting blade vibrates along its length with an amplitude of
10-70 μm and repeats 40,000 times per second (40 kHz) (the
vibration of the blade is microscopic and generally difficult to
see by the naked eye). The cutting blade then transmits the
received vibration energy to the cutting surface of the workpiece
to be cut, in which the vibration energy is cut by activating the
molecular energy of the rubber molecule and opening the molecular
chain.
Specifications:
| Item No | QR-CR40Q |
| Power | 800W |
| Generator | Digital generator |
| Frequency | 40KHZ |
| Voltage | 220V or 110V |
| Cutter Dimension | 72*82.5*25.5mm |
| Generator Dimension | 400*195*98mm |
| Gross weight | 13Kg |
Ultrasonic cutting advantages:
1. High stability: When the ultrasonic generator works, it
generates electromagnetic vibration and is converted into
mechanical oscillation and transmitted to the cutting knives and
cutting materials. The mechanical cutting is performed, so no sharp
cutting edge is required, and the blade wear is small, and at the
same time The cutter head can be replaced by itself.
2. Safety and environmental protection: When the ultrasonic knife
is cut, the temperature of the cutter head is lower than 50 degrees
Celsius, and no smoke and odor will be generated, which eliminates
the danger of injury and fire during cutting.
3. Cutting neatly: Since the ultrasonic wave is cut by
high-frequency vibration, the material will not adhere to the
surface of the blade, only a small pressure is required for
cutting, and the fragile and soft materials are not deformed and
worn, and the fabric is cut and automatically sealed. Will not
cause chipping.
4. Simple operation: The cutting knife is connected to the
ultrasonic generator, the generator is connected to the 220V mains,
and the switch can be cut to support the hand-held and
machine-mounted cutting.
Wide range of applications: rubber, vulcanized latex,
non-vulcanized latex, food and various textile materials, plastic
sheets can be ultrasonically cut.
Handheld 40khz Ultrasonic Food Cutter with Digital Generator No
Sticking Knife
